Phoenix Contact develops terminal blocks, power supplies, relays, connectors, signal conditioners, controllers & PLCs, I/O systems, Industrial Ethernet, controller system cabling, PCB terminal blocks & connectors, and surge suppression.

Commercial Data

Item number	2905577
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	DK1132
Catalog page	Page 100 (C-7-2015)
GTIN	4046356966290
Weight per piece (including packing)	87.7 g
Weight per piece (excluding packing)	87.7 g
Customs tariff number	85437090
Country of origin	DE

Notes

Utilization restriction
EMC note	EMC: class A product, see manufacturer’s declaration in the download area

Product Properties

Product type	Repeater power supply
Product family	MINI Analog
No. of channels	1
Insulation characteristics
Overvoltage category	II
Pollution degree	2

Electrical Properties

Electrical isolation	3-way isolation
Limit frequency (3 dB)	> 175 Hz
Protective circuit	Transient protection
Signal transmission behavior	In = Out
Step response (10-90%)	< 2 ms
Maximum temperature coefficient	< 0.01 %/K
Temperature coefficient, typical	< 0.01 %/K
Maximum transmission error	≤ 0.1 % (of final value)
Electrical isolation Input/output/power supply
Rated insulation voltage	50 V AC/DC
Test voltage	1.5 kV AC (50 Hz, 60 s)
Insulation	Basic insulation in accordance with IEC/EN 61010
Supply
Nominal supply voltage	24 V DC
Supply voltage range	19.2 V DC … 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715)
Power consumption	< 600 mW (at 24 V DC)

Input Data

Signal
Number of inputs	1
Current input signal	0 mA … 20 mA
Current input signal	4 mA … 20 mA
Max. current input signal	20 mA
Input voltage limitation	< 2 V (20 mA)

Output Data

Signal: Current
Number of outputs	1
Current output signal	0 mA … 20 mA
Current output signal	4 mA … 20 mA
Load/output load current output	≤ 800 Ω (at 20 mA)
Ripple	< 20 mV_rms

Connection Data

Connection method	Screw connection
Stripping length	12 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² … 2.5 mm²
Conductor cross section flexible	0.2 mm² … 2.5 mm²
Conductor cross section AWG	26 … 12

Interfaces

Data communication (bypass)
HART function	Yes
Limit frequency (3 dB)	2.5 Hz

Dimension

Width	6.2 mm
Height	93.1 mm
Depth	101.2 mm

Material Specifications

Color	green (RAL 6021)
Housing material	PBT
Fire protection for rail vehicles (DIN EN 45545-2) R22	HL 1 – HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23	HL 1 – HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24	HL 1 – HL 2

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-20 °C … 60 °C
Ambient temperature (storage/transport)	-40 °C … 85 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	5 % … 95 % (non-condensing)

Approvals

CE
Certificate	CE-compliant
UKCA
Certificate	UKCA-compliant
UL, USA/Canada
Identification	UL 508 Listed
	Class I, Div. 2, Groups A, B, C, D T4
	Class I, Zone 2, Group IIC
Shipbuilding approval
Certificate	DNV GL TAA000020N
Shipbuilding data
Temperature	B
Humidity	B
Vibration	B
EMC	A
Enclosure	Required protection according to the Rules shall be provided upon installation on board

EMC Data

Electromagnetic compatibility	Conformance with EMC directive
Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Noise emission
Standards/regulations	EN 61000-6-4
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Comments	Safety measures must be taken to prevent electrostatic discharge.
Electromagnetic HF field
Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Typical deviation from the measuring range final value	3 %
Fast transients (burst)
Designation	Fast transients (burst)
Standards/regulations	EN 61000-4-4
Typical deviation from the measuring range final value	3 %
Surge current load (surge)
Standards/regulations	EN 61000-4-5
Surge current load (surge)
Comments	Criterion B
Conducted interference
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6
Typical deviation from the measuring range final value	3 %

Standard And Regulations

Electrical isolation	3-way isolation

Mounting

Mounting type	DIN rail mounting
Assembly note	The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715.
Mounting position	any