Festo 8042539 5/2-Way Solenoid Valve, M5, Pneumatic Reset

Single-solenoid 24 V DC valve with pneumatic spring reset, 195 l/min nominal flow, internal pilot supply and a 10 mm body for compact controls.

SKU: Festo-8042539 Category:
Festo Solenoid Valves

Festo VUVG-LK10-M52-AT-M5-1H2L-S 5/2-Way Solenoid Valve

BrandFesto
Model IdentifierVUVG-LK10-M52-AT-M5-1H2L-S
Official Part Number8042539

Technical Overview

The Festo VUVG-LK10-M52-AT-M5-1H2L-S is a 10 mm single-solenoid valve with a 5/2-way function, M5 working ports and pneumatic spring reset. Its internally piloted piston slide operates from 2.5 to 7 bar and provides 195 l/min standard nominal flow. The 24 V DC coil data specify 0.8 W and continuous duty; switching times are 14 ms on and 17 ms off, with a maximum frequency of 2 Hz. LED indication and manual override assist commissioning, while manifold-rail or through-hole mounting supports compact control assemblies. IP40 protection and a −5 to +50 °C ambient range define its installation environment.

10 mm 5/2-way single-solenoid valve with pneumatic spring reset, M5 working ports, 24 V DC actuation and 195 l/min nominal flow.

Key Features

  • 5/2-way single-solenoid function with pneumatic spring reset
  • 10 mm valve size with M5 working ports 2 and 4
  • 195 l/min standard nominal flow rate to DIN 1343
  • 2.5–7 bar operating pressure with internal pilot air supply
  • 24 V DC coil data: 0.8 W; 100% duty cycle
  • 14 ms switch-on and 17 ms switch-off times; 2 Hz maximum frequency
  • LED signal indication and detenting/non-detenting manual override
  • Two-pin plug pattern H with horizontal electrical connection
  • Manifold-rail or through-hole mounting in any position
  • IP40 protection; −5 to +50 °C media and ambient range

Control a double-acting pneumatic load through M5 ports using one 24 V DC solenoid and pneumatic spring reset in a 10 mm valve body.

Technical Specification Matrix

ParameterValue
Valve function5/2-way, single solenoid
Type of actuationElectrical
Valve size10 mm
Standard nominal flow rate (standardised to DIN 1343)195 l/min
pneumatic working portM5
Operating voltage24 V DC
Operating pressure0.25 MPa...0.7 MPa; 2.5 bar...7 bar
DesignPiston slide with sealing ring
Type of resetPneumatic spring
Approvalc UL us - Recognised (Oil)
Certificate issuing authorityUL MH19482
Degree of protectionIP40
Exhaust-air functionCan be throttled
Sealing principleSoft
Mounting positionAny
Manual overrideDetenting; Non-detenting
Type of pilotingPiloted
Pilot air supplyInternal
Flow directionNon-reversible
lapOverlap
Signal status displayLED
Max. switching frequency2 Hz
Switching time off17 ms
Switching time on14 ms
Duty cycle100%
Max. positive test pulse with 0 signal1600 µs
Max. negative test pulse with 1 signal3000 µs
Characteristic coil data24 V DC: 0.8 W
Permissible voltage fluctuations+/-10%
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Vibration resistanceTransport application test with severity level 1 to FN 942017-4 and EN; 60068-2-6
Shock resistanceShock test with severity level 1 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC0 - No corrosion stress
LABS (PWIS) conformityVDMA24364 zone III
Media temperature-5 °C...50 °C
Pilot mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature-5 °C...50 °C
Physical Weight (kg)0.045
Electrical connection2-pin; Plug pattern H, horizontal connection; Plug
Type of mountingOn manifold rail; With through-hole
Pneumatic connection, port 2M5
Pneumatic connection, port 4M5
Note on materialsRoHS compliant
Material sealsHNBR; NBR
Material housingWrought aluminium alloy

Industrial Applications

1. Reciprocating Part-Transfer Cylinder

A compact assembly machine uses a double-acting cylinder to transfer a component between two positions. The valve's 5/2-way function alternates pressure and exhaust between its two M5 working ports. Its 10 mm size and manifold mounting support a small pneumatic control assembly, while LED indication helps identify the commanded solenoid during commissioning.

Problem Solved

Two working ports provide the directional switching needed for extension and retraction, while compact manifold mounting keeps the transfer mechanism's pneumatic controls grouped together.

5/2-way M5 ports 10 mm valve

2. Pneumatic Gripper Open-and-Close Sequencing

A small handling unit needs to open and close a double-acting gripper from an electrical command. The single-solenoid 5/2-way valve directs air to the working lines, with pneumatic spring reset providing the return switching action. Its internal pilot supply avoids a separate pilot-air connection within the documented 2.5–7 bar operating range.

Problem Solved

A solenoid command and pneumatic reset provide the two directional states needed by the gripper, while internal piloting avoids a separate pilot-air supply connection.

Single solenoid Pneumatic reset Internal pilot

3. Two-Position Product Diverter Actuation

A packaging conveyor uses a pneumatic actuator to move a product diverter between two routes. The 5/2-way valve changes the air connections using a solenoid command and pneumatic spring reset. Its documented switching times of 14 ms on and 17 ms off, together with a 2 Hz maximum switching frequency, provide concrete limits for planning the directional sequence.

Problem Solved

The valve connects a directional command and pneumatic return action to the diverter actuator, with specified switching times and frequency supporting realistic machine sequence planning.

14 ms on 17 ms off 2 Hz maximum