Festo 8031468 Dual 3/2-Way NC Valve, M5, M8, 24 V DC

Two normally closed monostable functions in a 10 mm valve, with spring reset, 135 l/min nominal flow, internal piloting and a three-pin M8 plug.

SKU: Festo-8031468 Category:
Festo Solenoid Valves

Festo VUVG-L10-T32C-MT-M5-1R8L Dual 3/2-Way Solenoid Valve

BrandFesto
Model IdentifierVUVG-L10-T32C-MT-M5-1R8L
Official Part Number8031468

Technical Overview

The Festo VUVG-L10-T32C-MT-M5-1R8L combines two normally closed, monostable 3/2-way functions in a 10 mm solenoid valve body. Mechanical spring reset and internal piloting support electrically commanded pneumatic switching over a 2.5–8 bar operating range, with a standard nominal flow rate of 135 l/min. The 24 V DC, 1.0 W coil data and three-pin A-coded M8 plug define the electrical interface. M5 connections, manifold-rail or through-hole mounting and manual override support compact machine integration. IP65 protection applies with a plug socket; ambient and media limits are −5 to +60 °C, reduced to +50 °C without holding-current reduction. Vacuum operation is not supported.

10 mm dual normally closed 3/2-way valve with M5 ports, 24 V DC actuation, three-pin M8 connection and 135 l/min nominal flow.

Key Features

  • Two normally closed, monostable 3/2-way functions
  • 10 mm valve size and 1.9 mm nominal size
  • 135 l/min standard nominal flow rate to DIN 1343
  • M5 pneumatic working connections
  • 2.5–8 bar working pressure; internal pilot-air supply
  • 24 V DC, 1.0 W coil data and 100% duty cycle
  • Three-pin A-coded M8x1 electrical plug
  • 8 ms switch-on and 11 ms switch-off times
  • Mechanical spring reset; detenting/non-detenting manual override
  • IP65 with plug socket; not suitable for vacuum

Control two normally closed 3/2-way pneumatic functions from one 10 mm valve body with M5 ports and an M8 electrical interface.

Technical Specification Matrix

ParameterValue
Valve function2x3/2 closed monostable
Type of actuationElectrical
Valve size10 mm
Standard nominal flow rate (standardised to DIN 1343)135 l/min
pneumatic working portM5
Operating voltage24 V DC
Operating pressure0.25 MPa...0.8 MPa; 2.5 bar...8 bar
DesignPiston gate valve
Type of resetMechanical spring
ApprovalRCM; c UL us - Recognised (Oil)
CE mark (see declaration of conformity)To EU EMC Directive; To EU Low Voltage Directive; In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC; To UK RoHS instructions; To UK regulations for electrical equipment
Degree of protectionIP65; With plug socket
Nominal size1.9 mm
Exhaust-air functionCan be throttled
Sealing principleSoft
Mounting positionAny
Manual overrideDetenting; Non-detenting; Concealed
Type of pilotingPiloted
Pilot air supplyInternal
lapOverlap
Pilot pressure0.2 MPa...0.8 MPa; 2 bar...8 bar
Suitability for vacuumNo
Switching time off11 ms
Switching time on8 ms
Duty cycle100%
Max. positive test pulse with 0 signal700 µs
Max. negative test pulse with 1 signal900 µs
Characteristic coil data24 V DC: 1.0 W
Permissible voltage fluctuations+/-10%
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN; 60068-2-6
Restrictions for environmental and media temperature-5 - 50 °C; Without holding current reduction
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 5 according to ISO 14644-1
Media temperature-5 °C...60 °C
Ambient temperature-5 °C...60 °C
Physical Weight (kg)0.054
Electrical connection3-pin; M8x1 A-encoded to EN 61076-2-104; Plug
Type of mountingEither:; On manifold rail; With through-hole
Pneumatic connection, port 1M5
Pneumatic connection, port 2M5
Pneumatic connection, port 4M5
Pneumatic connection, port 5M5
Note on materialsRoHS compliant
Material sealsHNBR; NBR
Material housingWrought aluminium alloy

Industrial Applications

1. Fixture Clamp and Ejector Sequencing

A compact assembly fixture uses separate single-acting clamp and ejector circuits at different points in its cycle. The dual normally closed 3/2-way functions provide two supply-and-exhaust switching paths in one 10 mm valve body. Mechanical spring reset returns each function, while M5 connections and the three-pin M8 interface define the fixture's pneumatic and electrical connections.

Problem Solved

Two monostable switching functions consolidate the clamp and ejector air commands in one compact valve, supporting separate process steps without using two individual valve bodies.

2 × 3/2-way NC 10 mm body M5 ports

2. Two-Zone Air-Blast Commands

A small packaging station directs compressed-air blasts to two separate process points, such as a part-release point and a tooling surface. Two normally closed 3/2-way functions let the machine sequence command the respective air circuits. The documented 8 ms switch-on and 11 ms switch-off times provide valve timing information for planning those commands alongside tubing and nozzle response.

Problem Solved

Separate normally closed air paths support two timed blast commands in one valve package, with published switching times providing a concrete basis for the pneumatic sequence.

2 pneumatic functions 8 ms on 11 ms off

3. Electrical-to-Pneumatic Pilot Signal Conversion

A machine uses pneumatic commands to actuate two downstream control functions. The dual 3/2-way valve converts 24 V DC electrical actuation into two normally closed pneumatic switching paths, with spring reset and M5 connections. Its internal pilot supply and compact manifold mounting support grouping these signal-conversion functions with the machine's other pneumatic controls within the 2.5–8 bar operating range.

Problem Solved

A compact dual-function valve links electrical sequence outputs to pneumatic command circuits, while spring reset supplies a defined monostable return action for each switching path.

24 V DC Internal pilot Spring reset