Festo 550204 Output Module, 8 PNP Outputs, 24 V DC

Festo 550204 Output Module, 8 PNP Outputs, 24 V DC

Eight-channel CPX output module with 2.1 A per channel pair, electronic channel fuses, short-circuit diagnostics and configurable output behaviour.

Festo Remote I/O and Network Interface Components

Festo CPX-8DA-H Eight-Channel Output Module

BrandFesto
Model IdentifierCPX-8DA-H
Official Part Number550204

Technical Overview

The Festo CPX-8DA-H provides eight positive-switching PNP outputs for a CPX control assembly, operating from 18–30 V DC with a 24 V nominal supply. The manufacturer rates the output supply at 2.1 A per channel pair and 8.4 A for the module, with electronic short-circuit protection per channel. Channel diagnostics identify short circuit or overload, while module diagnostics include output undervoltage. Configurable fail-safe, forcing, idle and short-circuit behaviour support system parameterisation, with LEDs showing group diagnostics, channel diagnostics and channel status. The 48 g electronics module uses reinforced PA/Makrolon housing; enclosure protection depends on the selected connection block.

Eight-channel CPX PNP output module with 24 V DC nominal supply, 2.1 A per channel pair, electronic protection and per-channel diagnostics.

Key Features

  • Eight PNP positive-switching outputs
  • 18–30 V DC operating range; 24 V DC nominal voltage
  • 2.1 A supply rating per channel pair; 8.4 A module rating
  • 50 W lamp-load rating stated for each channel pair
  • Internal electronic short-circuit fuse per channel
  • Short-circuit/overload diagnostics per channel and output-undervoltage diagnostics
  • Per-channel fail-safe, forcing and idle-mode parameterisation
  • Group, channel-diagnostic and channel-status LED indication
  • Typical 34 mA internal current consumption at nominal voltage
  • 48 g product weight; −5 to +50 °C ambient range

Control eight PNP outputs with per-channel electronic protection and diagnostics, using a 2.1 A rating per channel pair.

Technical Specification Matrix

ParameterValue
Physical Weight (kg)0.048
Ambient temperature-5 °C...50 °C
Storage temperature-20 °C...70 °C
Degree of protectionDepending on the connection block
Corrosion resistance class CRC1 - Low corrosion stress; (installed)
LABS (PWIS) conformityVDMA24364-B2-L
Material housingReinforced PA; Makrolon®
LED display1 Group diagnostics; 8 Channel diagnostics; 8 Channel status
DiagnosisShort circuit/overload per channel; Undervoltage of outputs
Number of outputs8
ParameterisationFail-safe per channel; Forcing per channel; Idle mode per channel; Behaviour after short circuit; Module monitoring
Operational voltage range DC18 V...30 V
Nominal operating voltage DC24 V
Intern power consumption nominal operating voltageTyp. 34 mA
Characteristic for outputsBased on IEC1131-T2
Switching logic for outputsPNP (positive switching)
Max. residual current outputs per module8.4 A
Max. power supply per channel2.1 A (50 W lamp load), per channel pair
Isolation channel - channelNo
Isolation channel - internal busYes, with intermediate air supply
Fuse protection (short circuit)Internal electronic fuse per channel; Additional fuse

Industrial Applications

1. Multi-Actuator Electrical Command Distribution

A production cell needs several positive-switching control outputs for compatible electrical loads. The module supplies eight PNP outputs within a CPX assembly, with a 24 V nominal supply and electronic protection per channel. Its channel-pair and module current ratings provide concrete limits for distributing the selected loads across the output connections rather than treating every channel as an independent full-current source.

Problem Solved

Eight grouped outputs consolidate electrical actuator commands, while per-channel protection and explicit pair/module ratings provide a defined basis for distributing the connected control loads.

8 PNP outputs 24 V DC 2.1 A per pair

2. Machine Indicator-Lamp Sequencing

A machine uses electrical lamps to show process states or operator prompts. The output module provides PNP switching and a manufacturer-stated 50 W lamp-load rating per channel pair, allowing lamp commands to be grouped with other CPX outputs. Local channel-status LEDs show the output conditions during setup, while the module current limit remains part of the load arrangement.

Problem Solved

Documented lamp-load capability connects machine-state commands to appropriate indicator circuits, while local output LEDs provide visible switching information during commissioning and inspection of the electrical sequence.

Lamp-load rating PNP switching Channel-status LEDs

3. Output-Circuit Fault Localization

A maintenance team needs to distinguish an output wiring fault from a general loss of supply in a machine station. The module reports short circuit or overload per channel and output undervoltage, with channel and group diagnostic LEDs. Configurable behaviour after a short circuit and module monitoring give the control system documented parameters for handling the affected output condition.

Problem Solved

Channel-specific diagnostics identify the affected output circuit, while undervoltage information separates a supply condition from a channel fault and supports focused maintenance investigation at the CPX station.

Per-channel diagnostics Undervoltage reporting Electronic channel fuse