
Festo 153235 R1/4 Distributor with Four 8 mm Outlets
Multiple distributor with one male R1/4 inlet, four 8 mm push-in outlets, 4.1 mm nominal bore, 9 Nm nominal tightening torque and 56 g product mass.
Festo QSLV4-1/4-8 Multiple Distributor
BrandFesto
Model IdentifierQSLV4-1/4-8
Official Part Number153235
Technical Overview
The Festo QSLV4-1/4-8 distributes one male R1/4 supply connection to four push-in outlets for 8 mm outside-diameter tubing. The 56 g PBT assembly uses a nickel-plated brass hollow bolt, coated thread seal, 4.1 mm nominal size and 18.1 mm tubing insertion depth.
R1/4 male multiple distributor with four 8 mm push-in outlets, 4.1 mm nominal size and 56 g product weight.
Key Features
- One supply connection and four outputs
- Male R1/4 supply thread
- Push-in outlets for 8 mm outside-diameter tubing
- 4.1 mm nominal size and 18.1 mm tube insertion depth
- Coated thread seal; 9 Nm nominal tightening torque with ±20% tolerance
- −0.95 to 6 bar across the full temperature range; up to 14 bar depending on temperature
- Liquid, ice-free water permitted at up to 6 bar and 0–50 °C
- PBT housing, nickel-plated brass hollow bolt, POM release rings and NBR tube seals
- 56 g product weight; any mounting position and −10 to 80 °C ambient range
Technical Specification Matrix
| Parameter | Value |
|---|---|
| Size | Standard |
| Nominal size | 4.1 mm |
| Tubing insertion depth | 18.1 mm |
| Type of seal on screwed plug | Coating |
| Mounting position | Any |
| Design | Push-pull principle |
| Size of pack | 1 |
| Operating pressure complete temperature range | -0.095 MPa...0.6 MPa; -0.95 bar...6 bar; -13.775 psi...87 psi |
| Temperature-dependent operating pressure | -0.095 MPa...1.4 MPa; -0.95 bar...14 bar; -13.775 psi...203 psi |
| Note on operating pressure | Water: max. 0.6 MPa at 0 - 50 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-]; Water (liquid, ice-free) |
| Note on operating and pilot medium | Lubricated operation possible |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Ambient temperature | -10 °C...80 °C |
| Nominal torque | 9 Nm |
| Tolerance for nominal tightening torque | ±20% |
| Physical Weight (kg) | 0.056 |
| Number of outputs | 4 |
| Number of supply lines | 1 |
| Pneumatic connection, port 1 | Male thread R1/4 |
| Pneumatic connection, port 2 | For tubing outside diameter of 8 mm |
| Colour of release ring | Blue |
| Note on materials | RoHS compliant |
| Material housing | PBT |
| Material hollow bolt | Brass, nickel-plated |
| Material release ring | POM |
| Material tubing seal | NBR |
| Material tubing clamp component | High-alloy stainless steel |