Festo 8086001 Inline Pressure Regulator, QS-6, 1–8 bar

Festo 8086001 Inline Pressure Regulator, QS-6, 1–8 bar

Inline regulator with two QS-6 ports, 1–8 bar adjustment, latching rotary knob, 90 l/min nominal flow, secondary exhausting and return flow.

SKU: Festo-8086001 Category:
Festo Pressure Regulator

Festo VRPA-C-Q6-E Inline Pressure Regulator

BrandFesto
Model IdentifierVRPA-C-Q6-E
Official Part Number8086001

Technical Overview

The Festo VRPA-C-Q6-E is a manually adjusted inline pressure regulator with QS-6 connections at both pneumatic ports. Its 1–8 bar regulation range and 90 l/min standard nominal flow rating support local pressure adjustment in a 6 mm tubing circuit. Secondary exhausting provides relief on the regulated side, while an integrated return-flow function permits reverse flow through the regulator arrangement. The rotary adjustment knob incorporates a latch, and this version has no integrated pressure gauge. Its 20 g PBT housing uses NBR static seals and supports through-hole mounting in any position.

Inline regulator without pressure gauge, featuring QS-6 ports, 1–8 bar adjustment, 90 l/min nominal flow, secondary exhausting and return flow.

Key Features

  • 1–8 bar adjustable pressure-regulation range
  • QS-6 push-in connections at ports 1 and 2
  • 90 l/min standard nominal flow rate to DIN 1343
  • Constant output pressure with secondary exhausting
  • Integrated return-flow function
  • Manual rotary-knob adjustment with latch
  • Inline configuration without integrated pressure gauge
  • Through-hole mounting in any position
  • 20 g product weight with PBT housing and NBR static seals
  • 0 to 60 °C ambient operating range

Regulate a 6 mm pneumatic line from 1 to 8 bar using a latching knob, with secondary exhausting and return flow built into a 20 g component.

Technical Specification Matrix

ParameterValue
Controller functionOutput pressure constant; With secondary exhausting; With return flow function
Pneumatic connection, port 1QS-6
Pneumatic connection, port 2QS-6
Type of mountingWith through-hole
Standard nominal flow rate (standardised to DIN 1343)90 l/min
Ambient temperature0 °C...60 °C
Material housingPBT
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Mounting positionAny
Type of actuationManual
Adjustment componentRotary knob with latch
Pressure regulation range0.1 MPa...0.8 MPa; 1 bar...8 bar; 14.5 psi...116 psi
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
LABS (PWIS) conformityVDMA24364-B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1
Physical Weight (kg)0.02
Note on materialsRoHS compliant
Material static sealsNBR
Pressure gauge configurationWithout pressure gauge

Industrial Applications

1. Local Working-Pressure Adjustment at an Actuator

An assembly fixture needs its own pressure adjustment in a 6 mm pneumatic working line. The inline regulator connects through two QS-6 ports and provides a 1–8 bar setting range. Its latching rotary knob supports local adjustment, while through-hole mounting secures the component to the fixture structure without requiring a threaded pneumatic mounting port.

Problem Solved

A local regulator gives the selected working line its own pressure adjustment, supporting a different pneumatic setting from the surrounding machine supply in a directly connected tubing circuit.

1–8 bar Two QS-6 ports Latching knob

2. Reducing Regulated Pressure During Product Changeover

A production fixture changes to a lower pressure setting for another product. The regulator includes secondary exhausting, providing a relief function on the regulated side as the setpoint is adjusted downward. The rotary knob and latch provide the manual adjustment interface, allowing the pressure setting to be changed locally within the 1–8 bar regulation range.

Problem Solved

Secondary exhausting provides a downstream pressure-relief path during downward adjustment, allowing the regulator to reduce the retained line pressure as well as restrict incoming air.

Secondary exhausting 1–8 bar Latching knob

3. Regulated Line with a Required Return-Flow Path

A pneumatic circuit needs forward pressure regulation while also permitting return flow through the same local regulator arrangement. This model explicitly includes a return-flow function alongside constant output pressure and secondary exhausting. Its two QS-6 connections fit a 6 mm tubing line, and the 90 l/min standard nominal flow rating provides a documented regulator characteristic for circuit selection.

Problem Solved

The integrated return-flow function accommodates reverse flow in a line that also needs forward pressure regulation, combining those pneumatic functions in one through-hole-mounted component.

Return-flow function 90 l/min nominal Through-hole mounting