Festo 159953 Twin Cylinder, 25 mm Stroke, Plain-Bearing Guide

Festo 159953 Twin Cylinder, 25 mm Stroke, Plain-Bearing Guide

Double-acting twin cylinder with 20 mm pistons, 25 mm stroke, through piston rod, plain-bearing guide, 10 mm endpoint adjustment and M5 connection.

SKU: Festo-159953 Category:
Festo Guided Cylinders

Festo DPZJ-20-25-P-A-S2 Twin Cylinder

BrandFesto
Model IdentifierDPZJ-20-25-P-A-S2
Official Part Number159953

Technical Overview

The Festo DPZJ-20-25-P-A-S2 is a double-acting twin cylinder with 20 mm pistons, 25 mm stroke and a plain-bearing guide. The yoke-driven configuration includes a through piston rod and a 10 mm adjustable end-position range, supporting guided movement with a mechanically adjustable endpoint. Proximity switches provide position detection, and elastic cushioning rings or plates act at both ends. The specified theoretical force is 282 N in either direction at 6 bar, with a 1–10 bar operating range and 1 m/s maximum speed. Its aluminium-alloy housing and cover use NBR seals and high-alloy stainless-steel piston rods.

25 mm double-acting twin cylinder with 20 mm pistons, through piston rod, plain-bearing guidance and 10 mm end-position adjustment.

Key Features

  • 25 mm stroke with 20 mm piston diameter
  • Double-acting yoke drive
  • Plain-bearing guide and through-piston-rod variant
  • 10 mm adjustable end-position range
  • 282 N theoretical force on both advance and return strokes at 6 bar
  • Elastic cushioning at both ends; 0.2 Nm specified end-position impact energy
  • 1–10 bar operating pressure and 1 m/s maximum speed
  • Proximity-switch position detection
  • M5 pneumatic connection and any mounting position
  • Aluminium-alloy housing and cover, NBR seals and stainless-steel piston rod

Move a guided attachment through 25 mm with 282 N theoretical force in either direction at 6 bar and a mechanically adjustable endpoint.

Technical Specification Matrix

ParameterValue
Stroke25 mm
Adjustable end-position range/length10 mm
Piston diameter20 mm
Operating mode, drive unitYoke
CushioningElastic cushioning rings/plates at both ends
Mounting positionAny
GuidePlain-bearing guide
DesignGuidance
Position detectionVia proximity switch
VariantsThrough piston rod
Operating pressure0.1 MPa...1 MPa; 1 bar...10 bar
Max. speed1 m/s
Mode of operationDouble-acting
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Ambient temperature-20 °C...80 °C
Impact energy in end positions0.2 Nm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke282 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke282 N
alternative connectionsSee product drawing
Pneumatic connectionM5
Material coverWrought aluminium alloy
Material sealsNBR
Material housingWrought aluminium alloy
Material piston rodHigh-alloy stainless steel

Industrial Applications

1. Guided Transfer of an Assembly Attachment

An assembly station moves a small attachment between two locations separated by a short travel. The twin cylinder provides 25 mm stroke with a yoke drive and plain-bearing guide, combining pneumatic movement and mechanical guidance. Its double-acting operation supplies powered advance and return, with the same 282 N theoretical force specified for each direction at 6 bar.

Problem Solved

The integrated drive and guide provide a defined transfer path with powered motion in both directions, combining actuation and guidance within one twin-cylinder assembly.

25 mm stroke Plain-bearing guide 282 N at 6 bar

2. Mechanically Adjustable Fixture Approach

A fixture needs to set the endpoint of a tool approach during machine setup. This cylinder provides a 10 mm adjustable end-position range within its 25 mm stroke configuration. Elastic cushioning at both ends manages endpoint contact, while proximity-switch position detection allows the machine sequence to observe the cylinder position as the tool approaches and withdraws.

Problem Solved

Mechanical endpoint adjustment sets the fixture approach location, while integrated cushioning and proximity-switch compatibility support controlled endpoint arrival and position observation during repeated machine cycles.

10 mm endpoint adjustment Elastic cushioning Proximity sensing

3. Actuation with a Rear-Side Mechanical Link

A machine mechanism needs access to the moving piston rod on the opposite side of the actuator for a mechanical link. The S2 configuration explicitly uses a through piston rod, while the yoke drive and plain-bearing guide provide the guided motion. The 25 mm stroke and equal theoretical advance and return forces describe the available movement for this arrangement.

Problem Solved

The through-piston-rod configuration makes moving rod access available on the opposite side of the actuator, supporting a rear mechanical connection within the same guided drive arrangement.

Through piston rod Yoke drive 25 mm stroke