Festo 8031814 5/3-Way Valve, Exhausted Centre, 18 mm, 24 V DC

Festo 8031814 5/3-Way Valve, Exhausted Centre, 18 mm, 24 V DC

Externally piloted ISO valve with exhausted centre, detenting switching position 14, 380 l/min interlinked flow and four-pin 24 V DC connection.

SKU: Festo-8031814 Category:
Festo Solenoid Valves

Festo VSVA-B-P53ED-ZD-A2-1T1L 5/3-Way Solenoid Valve

BrandFesto
Model IdentifierVSVA-B-P53ED-ZD-A2-1T1L
Official Part Number8031814

Technical Overview

The Festo VSVA-B-P53ED-ZD-A2-1T1L is an 18 mm 5/3-way valve with an exhausted mid-position and detenting switching position 14. Festo specifies mechanical spring return and electrical control for this exact configuration. External pilot air at 3–10 bar operates the valve across a −0.9 to 10 bar working-pressure range. Nominal interlinked flow is 380 l/min, with separate ratings of 390 l/min on an individual sub-base and 430 l/min for flow-optimised interlinking. The 24 V DC, 1.6 W coil interface uses a four-pin ISO 15407-2 plug. This 170 g sub-base-mounted valve includes LED indication, manual override and IP65/NEMA 4 protection.

18 mm 5/3-way valve with exhausted centre, detenting position 14, external pilot air and 380 l/min nominal interlinked flow.

Key Features

  • 5/3-way function with exhausted mid-position
  • Switching position 14 detenting; mechanical spring return and electrical control
  • 18 mm construction width with ISO sub-base interface
  • 380 l/min standard nominal and pneumatically interlinked flow
  • 390 l/min on an individual sub-base; 430 l/min with flow-optimised interlinking
  • −0.9 to 10 bar working range with 3–10 bar external pilot air
  • 24 V DC, 1.6 W coil data and 100% duty cycle
  • Four-pin plug electrical interface to ISO 15407-2
  • LED signal indication and detenting/non-detenting manual override
  • 170 g product weight, sub-base mounting and IP65/NEMA 4 protection

Combine directional control and an exhausted centre in an 18 mm ISO valve, with the exact P53ED configuration retaining switching position 14 by detent.

Technical Specification Matrix

ParameterValue
Valve function5/3 exhausted
Type of actuationElectrical
Construction width18 mm
Standard nominal flow rate (standardised to DIN 1343)380 l/min
pneumatic working portSub-base size 18 mm to ISO 15407-1; G1/8
Operating voltage24 V DC
Operating pressure-0.09 MPa...1 MPa; -0.9 bar...10 bar
DesignPiston gate valve
Type of resetMechanical spring; Electrical control
Degree of protectionIP65; NEMA 4
Nominal size5 mm
Exhaust-air functionCan be throttled; Via throttle plate; Via individual sub-base
Sealing principleSoft
Mounting positionAny
Manual overrideDetenting; Non-detenting
Type of pilotingPiloted
Pilot air supplyExternal
Flow directionNon-reversible
lapOverlap
Signal status displayLED
Pilot pressure0.3 MPa...1 MPa; 3 bar...10 bar
Flow rate of valve on individual sub-base390 l/min
Valve flow rate, pneumatically linked, flow optimized430 l/min
Flow rate of pneumatically interlinked valve380 l/min
Non symmetrical switching time off37 ms for control side 12
Non symmetrical switching time on10 ms for control side 14; 13 ms for control side 12
Duty cycle100%
Max. positive test pulse with 0 signal1500 µs
Max. negative test pulse with 1 signal800 µs
Nominal operating voltage DC24 V
Characteristic coil data24 V DC: 1.6 W
Immunity to surge2.5 kV
Pollution degree3
Permissible voltage fluctuations+/-10%
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN; 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC0 - No corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Media temperature-5 °C...50 °C
Relative air humidity0 - 90%
Sound pressure level85 dB(A)
Ambient temperature-5 °C...50 °C
Max. tightening torque for valve mounting0.8 Nm...1.2 Nm
Physical Weight (kg)0.17
Electrical connection4-pin; Plug; To ISO 15407-2
Type of mountingOn sub-base
Pilot air port 12/14Sub-base size 18 mm to ISO 15407-2
Pilot exhaust port 82/84Ducted; Not ducted; Either:
Pneumatic connection, port 1Sub-base size 18 mm to ISO 15407-2
Pneumatic connection, port 2Sub-base size 18 mm to ISO 15407-2
Pneumatic connection, port 3Sub-base size 18 mm to ISO 15407-2
Pneumatic connection, port 4Sub-base size 18 mm to ISO 15407-2
Pneumatic connection, port 5Sub-base size 18 mm to ISO 15407-2
Note on materialsRoHS compliant
Material sealsFluoro rubber; NBR
Material housingDie-cast aluminium; PA
Material screwsGalvanised steel
Exact P53ED switching configuration5/3-way, mid-position exhausted; switching position 14 detenting; mechanical spring return

Industrial Applications

1. Cylinder Control with an Exhausted Intermediate Valve State

A fixture cylinder needs directional actuation and a valve state that connects the working lines to exhaust. The P53ED configuration provides a 5/3-way exhausted mid-position, with switching position 14 specifically identified as detenting. The control sequence therefore uses the documented valve states and detent behaviour rather than treating this model as an ordinary non-latching spring-centred valve.

Problem Solved

The exhausted centre provides a distinct vented circuit state alongside directional actuation, while the documented detent identifies the exact switching behaviour needed in the fixture sequence.

5/3 exhausted centre Position 14 detenting 18 mm ISO valve

2. Low-Pressure Working Circuit with Separate Pilot Air

A pneumatic fixture operates its working circuit at a pressure below the valve's required pilot-pressure band. This valve uses external pilot air specified at 3–10 bar, independently of its −0.9 to 10 bar working range. The separate pilot arrangement allows actuation pressure to be provided by another pneumatic connection while the working ports serve the selected process-pressure circuit.

Problem Solved

External piloting separates valve actuation pressure from working-line pressure, supporting a lower-pressure process circuit without relying on that circuit to provide the required pilot pressure.

External pilot 3–10 bar pilot Separate working pressure

3. ISO Valve-Station Flow Matching

A machine builder integrates an exhausted-centre valve into an ISO valve station and needs flow data for the actual mounting arrangement. Festo specifies 380 l/min for pneumatic interlinking, 390 l/min on an individual sub-base and 430 l/min for flow-optimised interlinking. The 18 mm body and four-pin ISO 15407-2 connection define the mechanical and electrical interfaces of the selected valve.

Problem Solved

Arrangement-specific flow ratings give the valve-station design a relevant pneumatic basis, while defined ISO mounting and electrical interfaces support integration of the exact exhausted-centre function.

380 l/min interlinked 390 l/min individual ISO 15407-2