1. Local Pressure Offset for a Pneumatic Fixture
A pneumatic fixture supplied from a shared machine circuit may need a defined pressure reduction relative to that supply. The piston regulator maintains the manually selected pressure difference between its threaded inlet and push-in outlet. The 2–6 bar adjustment range provides the documented offset setting, while counter-locking retains the selected adjustment at the fixture connection.
Problem Solved
The differential regulation mechanism provides a local pressure offset referenced to the incoming supply, and counter-locking keeps the chosen mechanical adjustment secured during fixture operation.
Differential pressure control
2–6 bar adjustment
Counter-locking
2. Return-Flow Path in an Actuator Circuit
A pneumatic actuator circuit must accommodate reverse flow when pressure at the push-in connection is exhausted. The regulator incorporates a check valve for this return-flow function alongside its forward pressure-difference control. This documented flow path supports circuits that require both local pressure reduction and reverse discharge through the same connection, without adding a secondary-exhaust function to the regulator.
Problem Solved
The integrated check valve provides the specified reverse-flow path through the pressure regulator, allowing the connection to support return discharge as well as forward differential-pressure regulation.
Integrated check valve
Return-flow function
No secondary exhaust
3. Pressure Adjustment at a Compact Machine Connection
A compact assembly station needs an adjustable pneumatic pressure connection where tubing must leave sideways rather than extend above the component. The R1/8 screw-in inlet places the regulator directly at the connection, and the QS-8 side outlet accepts 8 mm tubing. Any-orientation mounting and the 22 g product weight support integrating the adjustment at that local machine position.
Problem Solved
Direct screw-in mounting and the side-facing push-in outlet combine local pressure adjustment with lateral tubing routing, simplifying the connection arrangement at a constrained pneumatic component location.
R1/8 screw-in mounting
QS-8 side outlet
22 g product weight