Festo 541275 Manual On/Off Valve, G3/8, 5500 l/min

Direct manual rotary 3/2 bistable valve with G3/8 supply and working ports, G1/2 exhaust port, 5500 l/min nominal flow and 0–18 bar operation.

SKU: Festo-541275 Category:
Festo Mechanical And Hand Operated Valves

Festo MS6-EM1-3/8 Manual On/Off Valve

BrandFesto
Model IdentifierMS6-EM1-3/8
Official Part Number541275

Technical Overview

The Festo MS6-EM1-3/8 is a manually operated on/off valve with a direct rotary switching mechanism and 3/2-way bistable function. G3/8 connections serve supply and working ports, with a G1/2 exhaust port, with a 5500 l/min standard nominal flow rating and a 0–18 bar operating range. The exhaust-air function cannot be throttled, and flow direction is non-reversible. The 580 g assembly uses a die-cast aluminium housing and TPE-U seals, with inline or accessory mounting in any position. Compressed air and inert gases are specified media, within a −10 to 60 °C media and ambient temperature range.

Manual direct-acting 3/2 bistable on/off valve with G3/8 ports, 5500 l/min nominal flow and 0–18 bar operating range.

Key Features

  • Manual rotary switching mechanism
  • Direct actuation and 3/2-way bistable function
  • G3/8 supply and working connections; G1/2 exhaust connection
  • 5500 l/min standard nominal flow to DIN 1343
  • 0–18 bar operating-pressure range
  • Exhaust-air function cannot be throttled; non-reversible flow
  • Inline or accessory mounting in any position
  • Die-cast aluminium housing and TPE-U seals
  • 580 g product weight and CRC 2 corrosion resistance
  • −10 to 60 °C media and ambient range

Switch and exhaust a G3/8 pneumatic branch manually with a bistable rotary valve rated for 5500 l/min nominal flow.

Technical Specification Matrix

ParameterValue
DesignRotary switching valve
Type of actuationManual
Exhaust-air functionCannot be throttled
Type of pilotingDirect
Valve function3/2-way, bistable
Operating pressure0 bar...18 bar
C value21.2 l/sbar
b value0.49
Standard nominal flow rate (standardised to DIN 1343)5500 l/min
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]; Inert gas
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC2 - Moderate corrosion stress
Note on materialsRoHS compliant
LABS (PWIS) conformityVDMA24364-B1/B2-L
Media temperature-10 °C...60 °C
Ambient temperature-10 °C...60 °C
Suitable for use with foodSee supplementary material information
Type of mountingEither:; Inline installation; With accessories
Mounting positionAny
Flow directionNon-reversible
Physical Weight (kg)0.58
Pneumatic connection, port 1G3/8
Pneumatic connection, port 2G3/8
Pneumatic connection, port 3G1/2
Material sealsTPE-U(PU)
Material housingDie-cast aluminium

Industrial Applications

1. Manual Air Enable for a Workstation

An operator turns the air supply to a pneumatic workstation on or off at the local preparation point. The direct rotary mechanism provides manual 3/2-way switching, with a bistable function that defines two maintained valve states. G3/8 connections and 5500 l/min nominal flow provide the pneumatic interface and component rating for evaluating the workstation branch.

Problem Solved

A maintained manual valve state gives the operator a local supply command for the workstation, without requiring an electrical control connection to switch the air branch.

Manual rotary actuation 3/2 bistable G3/8 ports

2. Exhaust Selection during Fixture Setup

During a fixture setup change, the operator needs to stop feeding the controlled branch and open its exhaust route. The manual 3/2 valve combines supply switching with a third G1/2 port for exhaust, allowing that circuit change at the rotary control. Its exhaust-air function cannot be throttled, so the valve provides switching rather than adjustable exhaust metering.

Problem Solved

The manual 3/2 function combines branch supply and exhaust selection in one control, providing a local means to change the pneumatic state during setup.

Manual exhaust selection G1/2 exhaust Unthrottled exhaust function

3. Local Supply Control for a Manual Air-Blow Task

A workstation uses an air-blow nozzle bank during a manually managed clearing task. The bistable rotary valve provides a local maintained air-flow selection, with G3/8 connections and 5500 l/min nominal flow for assessing the nozzle circuit. Direct manual actuation avoids a pilot-pressure requirement, while the documented operating range extends from 0 to 18 bar.

Problem Solved

A direct manual valve provides a maintained air-feed selection at the workstation, giving the operator a local control point for the nozzle supply branch.

Direct manual actuation 0–18 bar 5500 l/min nominal