1. Direction Control for a Double-Acting Transfer Cylinder
A transfer fixture needs to alternate supply and exhaust between two cylinder chambers. The valve provides a single-solenoid 5/2-way routing function with pneumatic spring reset, using 24 V DC electrical actuation and a separate 3–8 bar pilot-pressure requirement. Its 360 l/min standard nominal flow and 10 mm valve size define the selected component at the pneumatic station.
Problem Solved
Five-port switching supplies the two directional routing states needed by the cylinder, while pneumatic spring reset provides the specified alternate state for the machine command sequence.
5/2 single solenoid
Pneumatic spring reset
360 l/min nominal
2. Vacuum-Circuit Path Switching
A handling circuit needs a directional valve whose working paths can operate below atmospheric pressure. This model is explicitly suitable for vacuum and permits working pressure down to −0.9 bar with reversible flow. A separate 3–8 bar pilot requirement supplies the actuation condition while the working circuit follows the selected vacuum and venting connections.
Problem Solved
Documented vacuum suitability permits switching of sub-atmospheric working paths, while the separate pilot-pressure range defines the positive-pressure actuation needed for that vacuum circuit arrangement.
Vacuum suitability
−0.9 bar
3–8 bar pilot
3. Valve-Station Commissioning
During assembly of a pneumatic valve station, technicians need to exercise routing states and correlate electrical commands with the installed valve. The detenting and non-detenting manual override provides local actuation, while signal indication makes the commanded condition visible. The 10 mm valve uses through-hole mounting with a specified 0.25 Nm maximum valve-mounting torque for installation.
Problem Solved
Manual actuation and visible signal indication support local routing checks during commissioning, helping technicians relate the electrical command to the selected pneumatic path at the valve station.
Manual override
Signal indication
10 mm