Festo 150375 Inductive Sensor, PNP NC, 0.8 mm, M5

Festo 150375 Inductive Sensor, PNP NC, 0.8 mm, M5

Flush M5×0.5 sensor with 0.01 mm repetition accuracy, 5000 Hz switching, three-pin M8 A-coded plug, IP67 protection and CRC 4 corrosion resistance.

SKU: Festo-150375 Category:
Festo Inductive Sensors

Festo SIEN-M5B-PO-S-L Inductive Proximity Sensor

BrandFesto
Model IdentifierSIEN-M5B-PO-S-L
Official Part Number150375

Technical Overview

The Festo SIEN-M5B-PO-S-L is an M5×0.5 inductive proximity sensor with PNP normally closed output and flush mounting. Its rated operating distance is 0.8 mm, with 0.01 mm repetition accuracy under constant conditions and a 5000 Hz maximum switching frequency. The 10–30 V DC sensor provides up to 200 mA output current through a three-pin M8 A-coded plug. Lock nuts secure the small threaded body, with 1.5 Nm tightening torque specified for mounting. A yellow LED indicates switching state, while the 4.3 g assembly has IP67 protection, CRC 4 corrosion resistance and a −25 to 70 °C ambient range.

Flush M5×0.5 inductive sensor with PNP normally closed output, 0.8 mm rated distance, 0.01 mm repetition accuracy and three-pin M8 plug.

Key Features

  • 0.8 mm rated operating distance
  • PNP normally closed output
  • M5×0.5 body for flush installation via lock nuts
  • 0.01 mm repetition accuracy under constant conditions
  • 5000 Hz maximum switching frequency
  • 10–30 V DC supply and 200 mA maximum output current
  • Three-pin M8x1 A-coded electrical plug
  • 1.5 Nm mounting tightening torque
  • IP67 protection, CRC 4 corrosion resistance and yellow switching LED
  • 4.3 g product weight and −25 to 70 °C ambient range

Detect metal targets at a 0.8 mm rated distance using a flush M5 sensor with 0.01 mm repetition accuracy and a three-pin M8 connection.

Technical Specification Matrix

ParameterValue
Conforms to standardEN 60947-5-2
ApprovalRCM; c UL us - Listed (Oil)
CE mark (see declaration of conformity)To EU EMC Directive; In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)according to UK instructions for EMC (UK-E); according to UK RoHS instructions (UK-R)
Note on materialsRoHS compliant
Rated operating distance0.8 mm
Ambient temperature-25 °C...70 °C
Repetition accuracy with constant conditions0.01 mm
Switching outputPNP
Switching element functionN/C contact
Max. switching frequency5000 Hz
Max. output current200 mA
Short circuit current ratingPulsed
Operational voltage range DC10 V...30 V
Reverse polarity protectionFor all electrical connections
Electrical connection 1, connection typePlug
Electrical connection 1, connector systemM8x1, A-coded, to EN 61076-2-104
Electrical connection 1, number of connections/cores3
Electrical connection 1, type of mountingSnap-locking; Screw-type lock; Not rotatable
Electrical connection 1, compatible type of mountingCompatible with latching lock; Compatible with rotatable screw-type lock
SizeM5x0.5
Type of mountingVia lock nut
Tightening torque1.5 Nm
Mounting typeFlush
Physical Weight (kg)0.0043
Material housingPA; High-alloy stainless steel
Switching status indicationYellow LED
Ambient temperature with moving cable-5 °C...70 °C
Degree of protectionIP67
Immunity to surge1 kV
Corrosion resistance class CRC4 - Very high corrosion stress
LABS (PWIS) conformityVDMA24364-B2-L
Pollution degree3
Additional information for sensor selectionWith standards-based switching distance
Electrical outputPNP
Selection of sensor designStandard
Measuring principleInductive

Industrial Applications

1. Position Confirmation at a Compact Sensor Mount

A compact machine mechanism needs a non-contact signal when a suitable metal target reaches a defined position. The M5×0.5 sensor mounts through a bracket using lock nuts and permits flush installation. Its 0.8 mm rated distance and 0.01 mm repetition accuracy under constant conditions characterize the switching geometry, while the 1.5 Nm tightening torque defines the documented mounting requirement.

Problem Solved

Threaded mounting locates the inductive switching point near the mechanism, providing a position signal through the normally closed PNP output without requiring physical contact with the target.

M5×0.5 lock-nut mounting 0.8 mm rated distance PNP NC

2. Pulse Counting from Separated Metal Index Features

A machine controller counts passing metal index features to observe repeated mechanical cycles. Each suitable target entering and leaving the inductive field changes the PNP normally closed output, and the 5000 Hz maximum switching frequency defines the component response limit. The three-pin M8 A-coded plug and 10–30 V DC supply provide the electrical interface, while actual target spacing and circuit timing determine usable pulse separation.

Problem Solved

Inductive switching converts separated metal index passages into electrical pulses, supplying the controller with events for cycle counting through a documented industrial sensor interface.

5000 Hz maximum PNP normally closed Three-pin M8 plug

3. Missing Metal Insert Detection in an Assembly Nest

An assembly nest needs to detect whether a suitable metal insert is present before the next process step. The compact flush M5×0.5 body places an inductive sensing point close to the target, with a 0.8 mm rated distance. Its PNP normally closed output supplies the discrete sensing result, and the yellow LED provides local indication of the switching state.

Problem Solved

The switching output supplies a presence result for the metal insert, allowing the assembly sequence to distinguish a detected target from an empty sensing location.

Metal insert presence 0.8 mm rated distance PNP normally closed