1. Position Confirmation at a Compact Sensor Mount
A machine mechanism needs a non-contact signal when a suitable metal target reaches a defined position. The M8×1 sensor mounts through a bracket using lock nuts and permits flush installation for this version. Its 1.5 mm rated distance, 1.21 mm assured distance and 0.07 mm repetition accuracy under constant conditions characterize the documented switching geometry for the position target.
Problem Solved
Threaded mounting locates the inductive switching point near the mechanism, providing a position signal through the normally closed PNP output without requiring physical contact with the target.
M8×1 lock-nut mounting
1.5 mm rated distance
PNP NC
2. Pulse Counting from Separated Metal Index Features
A machine controller counts passing metal index features to observe repeated mechanical cycles. Each suitable target entering and leaving the inductive field changes the PNP normally closed output, and the 5000 Hz maximum switching frequency defines the component response limit. The three-pin M8 A-coded plug and 10–30 V DC supply provide the electrical interface, while actual target spacing and circuit timing determine usable pulse separation.
Problem Solved
Inductive switching converts separated metal index passages into electrical pulses, supplying the controller with events for cycle counting through a documented industrial sensor interface.
5000 Hz maximum
PNP normally closed
Three-pin M8 plug
3. Missing Metal Insert Detection in an Assembly Nest
An assembly nest needs to detect whether a metal insert is present before the next processing step. The inductive sensor provides a PNP normally closed switching result rather than an image or material-identification output. Published reduction factors of 1.0 for steel St 37, 0.7 for stainless steel St 18/8 and 0.25 for aluminium define important material distinctions when evaluating the sensing gap.
Problem Solved
The switching output supplies a presence result for the metal insert, allowing the assembly sequence to distinguish a detected target from an empty sensing location.
Metal insert presence
Material reduction factors
PNP normally closed