Festo 153235 R1/4 Distributor with Four 8 mm Outlets

Festo 153235 R1/4 Distributor with Four 8 mm Outlets

Multiple distributor with one male R1/4 inlet, four 8 mm push-in outlets, 4.1 mm nominal bore, 9 Nm nominal tightening torque and 56 g product mass.

SKU: Festo-153235 Category:
Festo Distributors

Festo QSLV4-1/4-8 Multiple Distributor

BrandFesto
Model IdentifierQSLV4-1/4-8
Official Part Number153235

Technical Overview

The Festo QSLV4-1/4-8 distributes one male R1/4 supply connection to four push-in outlets for 8 mm outside-diameter tubing. The 56 g PBT assembly uses a nickel-plated brass hollow bolt, coated thread seal, 4.1 mm nominal size and 18.1 mm tubing insertion depth.

R1/4 male multiple distributor with four 8 mm push-in outlets, 4.1 mm nominal size and 56 g product weight.

Key Features

  • One supply connection and four outputs
  • Male R1/4 supply thread
  • Push-in outlets for 8 mm outside-diameter tubing
  • 4.1 mm nominal size and 18.1 mm tube insertion depth
  • Coated thread seal; 9 Nm nominal tightening torque with ±20% tolerance
  • −0.95 to 6 bar across the full temperature range; up to 14 bar depending on temperature
  • Liquid, ice-free water permitted at up to 6 bar and 0–50 °C
  • PBT housing, nickel-plated brass hollow bolt, POM release rings and NBR tube seals
  • 56 g product weight; any mounting position and −10 to 80 °C ambient range

Distribute one R1/4 connection to four 8 mm tubing branches through a 56 g push-in assembly.

Technical Specification Matrix

ParameterValue
SizeStandard
Nominal size4.1 mm
Tubing insertion depth18.1 mm
Type of seal on screwed plugCoating
Mounting positionAny
DesignPush-pull principle
Size of pack1
Operating pressure complete temperature range-0.095 MPa...0.6 MPa; -0.95 bar...6 bar; -13.775 psi...87 psi
Temperature-dependent operating pressure-0.095 MPa...1.4 MPa; -0.95 bar...14 bar; -13.775 psi...203 psi
Note on operating pressureWater: max. 0.6 MPa at 0 - 50 °C
Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-]; Water (liquid, ice-free)
Note on operating and pilot mediumLubricated operation possible
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Ambient temperature-10 °C...80 °C
Nominal torque9 Nm
Tolerance for nominal tightening torque±20%
Physical Weight (kg)0.056
Number of outputs4
Number of supply lines1
Pneumatic connection, port 1Male thread R1/4
Pneumatic connection, port 2For tubing outside diameter of 8 mm
Colour of release ringBlue
Note on materialsRoHS compliant
Material housingPBT
Material hollow boltBrass, nickel-plated
Material release ringPOM
Material tubing sealNBR
Material tubing clamp componentHigh-alloy stainless steel