Festo 153503 Differential Pressure Regulator, R1/8, QS-8

Festo 153503 Differential Pressure Regulator, R1/8, QS-8

Compact piston regulator maintains a manually set pressure difference, with 2–6 bar adjustment, return flow, side outlet and an 8 mm push-in connection.

SKU: Festo-153503 Category:
Festo Pressure Regulator

Festo LRLL-1/8-QS-8 Differential Pressure Regulator

BrandFesto
Model IdentifierLRLL-1/8-QS-8
Official Part Number153503

Technical Overview

The Festo LRLL-1/8-QS-8 is a directly actuated differential pressure regulator with an R1/8 threaded inlet and a side-facing QS-8 outlet for 8 mm tubing. Its piston mechanism maintains a manually set pressure difference between the threaded connection and push-in connection, with a 2–6 bar adjustment range and 0–9 bar inlet range. An integrated check valve supports return flow when the connected circuit exhausts through the push-in side. Counter-locking secures the adjustment, while screw-in mounting in any orientation supports installation directly at a pneumatic connection. The 22 g unit has a reinforced PBT housing, nickel-plated brass screwed plug and PTFE thread seal.

R1/8 differential pressure regulator with QS-8 side outlet, 2–6 bar adjustment, return-flow function and 22 g product weight.

Key Features

  • Directly actuated piston regulator maintains a manually set pressure difference
  • 2–6 bar pressure-regulation range; 0–9 bar inlet pressure
  • R1/8 threaded connection and QS-8 push-in outlet for 8 mm tubing
  • Side-facing outlet for direct connection at the pneumatic component
  • Integrated check valve provides the return-flow function
  • 115 l/min nominal flow open; 110 l/min nominal flow closed
  • Counter-locking adjustment and screw-in mounting in any orientation
  • Reinforced PBT housing, nickel-plated brass screwed plug and PTFE thread seal
  • 22 g product weight and 0–60 °C ambient range

Maintain a manually selected pressure difference directly at an R1/8 connection, with an 8 mm side outlet and integrated return flow.

Technical Specification Matrix

ParameterValue
Controller functionDifferential pressure constant; With return flow function
Pneumatic connection, port 1R1/8
Pneumatic connection, port 2QS-8
Type of mountingScrew-in
Nominal flow rate open115 l/min
Pressure regulation range2 bar...6 bar
Inlet pressure 10 MPa...0.9 MPa; 0 bar...9 bar; 0 psi...130.5 psi
Ambient temperature0 °C...60 °C
Material housingReinforced PBT
Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-]
Actuator lockCounter-locking
Mounting positionAny
DesignDirectly actuated piston regulator; With through compressed air supply
Nominal flow rate closed110 l/min
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
LABS (PWIS) conformityVDMA24364-B1/B2-L
Physical Weight (kg)0.022
Material screwed plugNickel-plated brass
Note on materialsRoHS compliant
Material thread sealPTFE
Outlet orientationAt the side
Secondary exhaustWithout secondary exhaust
Pressure gaugeWithout pressure gauge
Tubing outside diameter, port 28 mm

Industrial Applications

1. Local Pressure Offset for a Pneumatic Fixture

A pneumatic fixture supplied from a shared machine circuit may need a defined pressure reduction relative to that supply. The piston regulator maintains the manually selected pressure difference between its threaded inlet and push-in outlet. The 2–6 bar adjustment range provides the documented offset setting, while counter-locking retains the selected adjustment at the fixture connection.

Problem Solved

The differential regulation mechanism provides a local pressure offset referenced to the incoming supply, and counter-locking keeps the chosen mechanical adjustment secured during fixture operation.

Differential pressure control 2–6 bar adjustment Counter-locking

2. Return-Flow Path in an Actuator Circuit

A pneumatic actuator circuit must accommodate reverse flow when pressure at the push-in connection is exhausted. The regulator incorporates a check valve for this return-flow function alongside its forward pressure-difference control. This documented flow path supports circuits that require both local pressure reduction and reverse discharge through the same connection, without adding a secondary-exhaust function to the regulator.

Problem Solved

The integrated check valve provides the specified reverse-flow path through the pressure regulator, allowing the connection to support return discharge as well as forward differential-pressure regulation.

Integrated check valve Return-flow function No secondary exhaust

3. Pressure Adjustment at a Compact Machine Connection

A compact assembly station needs an adjustable pneumatic pressure connection where tubing must leave sideways rather than extend above the component. The R1/8 screw-in inlet places the regulator directly at the connection, and the QS-8 side outlet accepts 8 mm tubing. Any-orientation mounting and the 22 g product weight support integrating the adjustment at that local machine position.

Problem Solved

Direct screw-in mounting and the side-facing push-in outlet combine local pressure adjustment with lateral tubing routing, simplifying the connection arrangement at a constrained pneumatic component location.

R1/8 screw-in mounting QS-8 side outlet 22 g product weight