1. Guided Transfer of an Assembly Attachment
An assembly station moves a small attachment between two locations separated by a short travel. The twin cylinder provides 25 mm stroke with a yoke drive and plain-bearing guide, combining pneumatic movement and mechanical guidance. Its double-acting operation supplies powered advance and return, with the same 282 N theoretical force specified for each direction at 6 bar.
Problem Solved
The integrated drive and guide provide a defined transfer path with powered motion in both directions, combining actuation and guidance within one twin-cylinder assembly.
25 mm stroke
Plain-bearing guide
282 N at 6 bar
2. Mechanically Adjustable Fixture Approach
A fixture needs to set the endpoint of a tool approach during machine setup. This cylinder provides a 10 mm adjustable end-position range within its 25 mm stroke configuration. Elastic cushioning at both ends manages endpoint contact, while proximity-switch position detection allows the machine sequence to observe the cylinder position as the tool approaches and withdraws.
Problem Solved
Mechanical endpoint adjustment sets the fixture approach location, while integrated cushioning and proximity-switch compatibility support controlled endpoint arrival and position observation during repeated machine cycles.
10 mm endpoint adjustment
Elastic cushioning
Proximity sensing
3. Actuation with a Rear-Side Mechanical Link
A machine mechanism needs access to the moving piston rod on the opposite side of the actuator for a mechanical link. The S2 configuration explicitly uses a through piston rod, while the yoke drive and plain-bearing guide provide the guided motion. The 25 mm stroke and equal theoretical advance and return forces describe the available movement for this arrangement.
Problem Solved
The through-piston-rod configuration makes moving rod access available on the opposite side of the actuator, supporting a rear mechanical connection within the same guided drive arrangement.
Through piston rod
Yoke drive
25 mm stroke