
Festo 186127 Long Push-In L-Fitting, G1/8 to 4 mm Tube, Pack 10
Long L-shaped fitting with G1/8 male thread, 4 mm push-in connection, PBT housing, nickel-plated brass screwed plug and 14.9 mm tube insertion depth.
Festo QSLL-G1/8-4 Long Push-In L-Fitting
BrandFesto
Model IdentifierQSLL-G1/8-4
Official Part Number186127
Technical Overview
The Festo QSLL-G1/8-4 connects a G1/8 female port to 4 mm outside-diameter tubing through a long L-shaped push-pull fitting. The PBT housing and nickel-plated brass screwed plug incorporate a blue POM release ring, NBR tubing seal and stainless-steel clamping component, with 14.9 mm tube insertion depth.
Long L-shaped male G1/8-to-4 mm push-in fitting with PBT housing, nickel-plated brass screwed plug and manufacturer pack size ten.
Key Features
- Male G1/8 threaded connection to 4 mm outside-diameter tubing
- Long L-shaped push-pull design with blue POM release ring
- 2.8 mm nominal size and 14.9 mm tubing insertion depth
- −0.95 to 6 bar operating pressure over the complete temperature range
- Temperature-dependent operating pressure up to 14 bar; −10 to 80 °C ambient range
- Water service requires an additional OL sealing ring and is limited to 6 bar at maximum 50 °C
- PBT housing, nickel-plated brass screwed plug, NBR tubing seal and stainless-steel clamp
- 13 mm external hexagon; 5.4 Nm nominal tightening torque ±20%
- 14 g product weight, manufacturer pack size ten and CRC 1 corrosion resistance
- Class 4 cleanroom suitability according to the stated ISO 14644 references
Technical Specification Matrix
| Parameter | Value |
|---|---|
| Size | Standard |
| Nominal size | 2.8 mm |
| Tubing insertion depth | 14.9 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | L-shape, long; Push-pull principle |
| Size of pack | 10 |
| Operating pressure complete temperature range | -0.095 MPa...0.6 MPa; -0.95 bar...6 bar; -13.775 psi...87 psi |
| Temperature-dependent operating pressure | -0.095 MPa...1.4 MPa; -0.95 bar...14 bar; -13.775 psi...203 psi |
| Note on operating pressure | Water: max. 0.6 MPa at max. 50°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-]; Water (liquid, ice-free) |
| Note on operating and pilot medium | Lubricated operation possible; Water: G-thread only possible with sealing ring type OL as additional; accessory |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 4 according to ISO 14644-1 |
| Ambient temperature | -10 °C...80 °C |
| Nominal torque | 5.4 Nm |
| Tolerance for nominal tightening torque | ±20% |
| Physical Weight (kg) | 0.014 |
| Type of mounting | External hex SW13 |
| Pneumatic connection, port 1 | Male thread G1/8 |
| Pneumatic connection, port 2 | For tubing outside diameter of 4 mm |
| Colour of release ring | Blue |
| Material screwed plug | Nickel-plated brass |
| Note on materials | RoHS compliant |
| Material housing | PBT |
| Material release ring | POM |
| Material tubing seal | NBR |
| Material tubing clamp component | High-alloy stainless steel |