$ 370.41
The DP/DP transceiver is housed in a 40 mm casing of the S7-300 series. It can be mounted on a standard mounting rail (7.5 mm and 15 mm) as well as on a mounting rail for the S7 design.
The preferred arrangement is upright in a row, side by side, and without clearance.
The transceiver is connected to the PROFIBUS DP networks through an integral 9-pin sub-D connector.
| DP/DP transceiver | |
| Article Number | 6ES7158-0AD01-0XA0 |
| PROFIBUS transmission rate | max. 12 Mbit/s |
| Interfaces | |
| PROFIBUS DP | 9-pin Sub-D connector |
| Supply voltage | 24 V DC |
| Current consumption typ. | 150 mA |
| Mounting | Upright (DIP switches above) |
| Perm. environmental conditions | |
| Operating temperature | |
| horizontal mounting | 0°C … +60°C |
| all other mounting positions | 0°C … +40°C |
| Transport/storage temperature | -40 °C … +70 °C |
| Relative humidity | 10-95 % at +25 °C |
| Design | |
| Dimensions (W x H x D) in mm | 40 x 127 x 117 |
| Weight | approx. 250 g |
| Degree of protection | IP20 |
| Weight | 0.301 kg |
|---|---|
| Dimensions | 12.8 × 15.2 × 5.2 cm |
Axmatic Sdn Bhd
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penang
