Siemens SINAMICS G120 PM240-2 Power Module 110kW

Technical Overview

3AC 380-480V 110kW Power Module with integrated Class A filter, braking chopper, and IP20 protection for demanding motor control applications.

Key Features

Integrated Class A filter for EMC compliance.
Built-in braking chopper for dynamic braking and energy dissipation.
Designed for 3-phase 380-480V input voltage applications.
Offers high overload capability: 150% for 57s and 200% for 3s (HO).
Internal air cooling system ensures reliable operation.
IP20 protection rating for typical industrial environments.
Supports wide output frequency ranges: 0-200 Hz (vector) and 0-550 Hz (V/f).
Active product with a straightforward lifecycle, ensuring long-term availability.

Technical Specification Matrix

Parameter	Value
Article number	6SL3210-1PE32-1AL0
Product Type	SINAMICS G120 Power Module PM240-2
Input Phases	3 AC
Line Voltage	380 ... 480 V ±10%
Line Frequency	47 ... 63 Hz
Rated Power (Low Overload - LO)	110.00 kW (150.00 hp)
Rated Power (High Overload - HO)	90.00 kW (125.00 hp)
Rated Current (LO)	205.00 A
Rated Current (HO)	178.00 A
Max. Output Current	356.00 A
Pulse Frequency	2 kHz
Output Frequency (Vector Control)	0 ... 200 Hz
Output Frequency (V/f Control)	0 ... 550 Hz
Overload Capability (LO)	1.1 x rated output current (110%) for 57s, 1.5 x rated output current (150%) for 3s (cycle time 300s)
Overload Capability (HO)	1.5 x output current rating (150%) for 57s, 2 x output current rating (200%) for 3s (cycle time 300s)
Power Factor λ	0.95
Offset Factor cos φ	0.99
Efficiency η	0.99
Sound Pressure Level (1m)	68 dB
Power Loss	2.17 kW
Filter Class (integrated)	Class A
Cooling	Internal air cooling
Cooling Air Requirement	0.153 m³/s (5.403 ft³/s)
Installation Altitude	1,000 m (3,280.84 ft)
Ambient Temperature (Operation LO)	-20 ... 40 °C (-4 ... 104 °F)
Ambient Temperature (Operation HO)	-20 ... 50 °C (-4 ... 122 °F)
Relative Humidity (Max. operation)	95 % RH, condensation not permitted
Line Side Connection Type	M10 bolt
Line Side Conductor Cross-section	35.00 ... 120.00 mm²
Protection	IP20
Physical Weight (kg)	66
Dimensions L x W x H (cm)	74.5 x 46.9 x 38.5

Industrial Applications

1. Industrial Pumping Systems for Water/Wastewater Treatment

This power module precisely controls large industrial pumps in water and wastewater treatment plants, regulating flow rates and pressure based on demand. Its high power rating (up to 110 kW) and robust overload capabilities are ideal for starting and stopping pumps, which often experience high inrush currents.

Problem Solved

Efficiently controls high-power pumps (up to 110 kW), reducing energy consumption and mechanical stress during start/stop cycles, leading to extended pump life and lower operating costs. The integrated braking chopper handles regenerative energy from decelerating pumps, and the 3AC 380-480V input ensures compatibility with standard industrial power grids.

Variable speed drivepump controlwastewater treatmentenergy efficiencyregenerative braking3AC 380-480V110 kW200% overloadIP20

2. HVAC Systems for Large Commercial Buildings

The SINAMICS G120 Power Module is suitable for driving large fans and compressors in Heating, Ventilation, and Air Conditioning (HVAC) systems in commercial buildings. Its ability to provide variable frequency control allows for optimized airflow and temperature regulation, reducing energy consumption and improving occupant comfort.

Problem Solved

Enables precise speed control of large HVAC motors, leading to significant energy savings, reduced noise, and better climate control compared to traditional on/off systems. The integrated Class A filter ensures compliance with EMC standards in building environments, and the wide operating temperature range (-20 to 50 °C) allows for reliable performance.

Variable frequency drive (VFD)HVACfan controlcompressor controlbuilding automationenergy optimization3AC 380-480V90 kWClass A filterIP20

3. Conveyor Belt Systems in Material Handling

In material handling applications, this power module precisely controls the speed and torque of motors driving heavy-duty conveyor belts. The high overload capacity is beneficial for starting loaded conveyors and handling sudden load variations, while the braking chopper assists with controlled deceleration and energy management.

Problem Solved

Provides smooth and controlled acceleration/deceleration of heavy conveyor belts, preventing mechanical shock and reducing wear on equipment. The integrated braking chopper can dissipate energy generated during deceleration or handle inclined conveyors, while the 110 kW power output is suitable for driving substantial loads, and the IP20 rating meets requirements for protected industrial environments.

Motor controlconveyor systemsmaterial handlingtorque controlvariable speedregenerative braking3AC 380-480V110 kW200% overloadIP20