Part Number: 1060991
Encoders Model: BTF13-P1BM1025
OEM Spec Ref
Measurement range | 0 m … 10 m |
Encoder | Absolute encoders |
Resolution (wire draw + encoder) | 0.04 mm 1) 2) |
Repeatability | ≤ 1.5 mm 3) |
Linearity | ≤ ± 2 mm 3) |
Hysteresis | ≤ 3 mm 3) |
1) The values shown have been rounded.
2) Example calculation based on the BTF08 with PROFINET: 200 mm (wire draw length per revolution – see Mechanical data): 262,144 (number of steps per revolution) = 0.001 mm (resolution of wire draw + encoder combination).
3) Value applies to wire draw mechanism.
Communication interface | PROFIBUS DP |
Programmable/configurable | ✔ |
Connection type | Male connector, Female connector, 2x, 1x, M12, M12, 5-pin, 5-pin, axial, axial |
Supply voltage | 10 V … 32 V |
Power consumption | ≤ 1.5 W (without load) |
MTTFd: mean time to dangerous failure | 60 years (EN ISO 13849-1) 1) |
1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Weight | 3.78 kg |
Measuring wire material | Highly flexible stranded steel 1,4401 stainless steel V4A |
Measuring wire diameter | 1.35 mm |
Weight (measuring wire) | 7.1 g/m |
Housing material, wire draw mechanism | Aluminum (anodised), plastic |
Spring return force | 10 N … 20 N 1) |
Length of wire pulled out per revolution | 332.4 mm |
Life of wire draw mechanism | Typ. 1,000,000 cycles 2) 3) |
Actual wire draw length | 10.2 m |
Wire acceleration | 40 m/s² |
Operating speed | 8 m/s |
Mounted encoder | A3M60, A3M60B-S1PB013X13, 1051018 |
Mounted mechanic | MRA-F130-110D2, 6028627 |
1) These values were measred at an ambient temperature of 25 °C. There may be variations at other temperatures.
2) Average values, which depend on the application.
3) The service life depends on the type of load. This is influenced by environmental conditions, the installation location, the measuring range in use, the traversing speed, and acceleration.
EMC | According to EN 61000-6-2 and EN 61000-6-3 |
Enclosure rating | IP64, mounted mechanic
IP67, Encoder (IEC 60529) 1) |
Operating temperature range | –10 °C … +70 °C |
1) With mating connector fitted.
Weight | 5.143 kg |
---|
Axmatic Sdn Bhd
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penang