| Product | Model | Specifications | ||
|---|---|---|---|---|
| T-branch Tap for 1 branch line |
DCN1-1NC | Cable wiring direction: Toward top Cable lock direction: From top Connector screw direction: From top |
Provided with 3 parallel connectors with clamps (XW4G-05C1-H1-D), standard terminating resistor |
|
| DCN1-1C | Cable wiring direction: Toward side Cable screw direction: From top Connector screw direction: From side |
Provided with 3 parallel connectors with screws (XW4B-05C1-H1-D), standard terminating resistor |
||
| DCN1-2C | Cable wiring direction: Toward top Cable screw direction: From side Connector screw direction: From top |
|||
| DCN1-2R | Cable wiring direction: Toward side Cable screw direction: From top Connector screw direction: From top |
Provided with 3 orthogonal connectors with screws (XW4B-05C1-V1R-D), standard terminating resistor |
||
| T-branch Tap for 3 branch lines |
DCN1-3NC | Cable wiring direction: Toward top Cable lock direction: From top Connector screw direction: From top |
Provided with 5 parallel clamp connectors with screws (XW4G-05C1-H1-D), standard terminating resistor |
|
| DCN1-3C | Cable wiring direction: Toward side Cable screw direction: From top Connector screw direction: From side |
Provided with 5 parallel connectors with screws (XW4B-05C1-H1-D), standard terminating resistor |
||
| DCN1-4C | Cable wiring direction: Toward top Cable screw direction: From side Connector screw direction: From top |
|||
| DCN1-4R | Cable wiring direction: Toward side Cable screw direction: From top Connector screw direction: From top |
Provided with 5 orthogonal clamp connectors with screws (XW4B-05C1-V1R-D), standard terminating resistor |
||
| Power Supply Tap | DCN1-1P | Tap provided with 2 connectors, standard terminating resistor, and fuse | ||
| Connectors | XW4G-05C1-H1-D | Parallel clamp connector with screws Connector insertion and wiring both performed horizontally. |
||
| XW4G-05C4-TF-D | Parallel multi-branching clamp connector with screws Connector insertion and wiring performed in same direction. |
|||
| XW4B-05C1-H1-D | Parallel connector with screws Connector insertion and wiring performed in same direction. |
|||
| XW4B-05C4-T-D | Parallel, screw-less, multi-branching connector Connector insertion and wiring performed in same direction. |
|||
| XW4B-05C4-TF-D | Parallel, multi-branching connector with screws Connector insertion and wiring performed in same direction. |
|||
| XW4B-05C1-V1R-D | Orthogonal connector with screws Connector insertion and wiring performed at a right angle. |
|||
| DeviceNet Standard Cables |
Thin Cables |
DCA1-5C10(-B) | Outer diameter: 7.00 mm Length: 100 m DCA1-5C10-B: Cable color: Blue DCA1-5C10: Cable color: Gray |
|
| Thick Cables |
DCA2-5C10(-B) | Outer diameter: 11.6 mm Length: 100 m DCA2-5C10-B: Cable color: Blue DCA2-5C10: Cable color: Gray |
||
| Terminal-block Terminator |
DRS1-T | Resistance of 121 Ω | ||
| Rated current | Between main lines: 8 A (power supply line) and 2 A (signal line) |
|---|---|
| Between main and branch lines: 3 A (power supply line) and 1 A (signal line) | |
| Insulation resistance | 100 M Ω min. (at 500 VDC) |
| Dielectric strength | 500 VAC for 1 min, leakage current: 1 mA max. |
| Ambient operating temperature | 0°C to 55°C |
| Type | Connectors with Cables DCA1-5CN[][][]1 |
T-branch Connector DCN2-1 |
Assembling-type Connector XS2[]-D5S7 |
Connectors with Terminating Resistor DRS2-[] |
|---|---|---|---|---|
| Rated current | 3 A | |||
| Rated voltage | 125 VDC | |||
| Contact resistance (connector) |
40 mΩ max. (at 20 mVDC max. and 100 mA max.) | |||
| Insulation resistance | 1,000 MΩ min. (at 500 VDC) | |||
| Dielectric strength (connector) |
1,500 VAC for 60 seconds (leakage current: 1 mA max.) | |||
| Ambient operating temperature |
-20°C to 65°C * | |||
| Storage temperature range |
-25°C to 70°C | |||
| Degree of protection | IEC IP67 | |||
| Insertion durability | 200 times | |||
| Cable strength | 98 N for 15 s | — | ||
| Vibration resistance | No current interruptions of more than 1 μs while performing simple vibrations at either 10 to 500 Hz with 1.52-mm full amplitude or at acceleration 100 m/s2, whichever is smaller |
|||
| Type | Connectors with Cables DCA1-5CS[][][]1 |
T-branch Connector DCN2-1S |
Connectors with Terminating Resistor DRS2-[]S |
Branch Relay Box DCN2-S[]C5H |
|---|---|---|---|---|
| Rated current | 3 A | |||
| Rated voltage | 125 VDC | |||
| Contact resistance (connector) |
40 mΩ max. (at 20 mVDC max. and 100 mA max.) | |||
| Insulation resistance | 1,000 MΩ min. (at 500 VDC) | |||
| Dielectric strength (connector) |
1,500 VAC for 60 seconds (leakage current: 1 mA max.) | 1,000 VAC for 60 seconds |
||
| Ambient operating temperature |
-20°C to 65°C * | |||
| Storage temperature range |
-25°C to 70°C | |||
| Degree of protection | IEC IP67 | |||
| Insertion durability | 200 times | |||
| Cable strength | 98 N for 15 s | — | ||
| Vibration resistance | No current interruptions of more than 1 μs while performing simple vibrations at either 10 to 500 Hz with 1.52-mm full amplitude or at acceleration 100 m/s2, whichever is smaller |
|||
| Lock strength | Pulling: 100 N/15 s, Rotating: 1 N·m/15 s | |||
| Lock force | 0.1 to 0.25 N·m | |||
| Type | Connectors with Thick Cables DCA2- 5CN[][][]1 |
Connectors with Thin Cables DCA1- 5CN[][]W5 |
T-branch Connector DCN3-11 |
T-branch Connector DCN3-12 |
Connectors with Terminating Resistor DRS3-1 |
Panel Mounting Connector DCA2- 5CNC5P1 |
Panel Mounting Connector XS4M- D521-1 |
|---|---|---|---|---|---|---|---|
| Rated current | 8 A | 3 A | 8 A | 3 A *1 | 8 A | ||
| Rated voltage | 125 VDC | ||||||
| Contact resistance (connector) |
30 mΩ max. (at 20 mVDC max. and 100 mA max.) | ||||||
| Insulation resistance |
1,000 MΩ min. (at 500 VDC) | ||||||
| Dielectric strength (connector) |
1,500 VAC for 60 seconds (leakage current: 1 mA max.) | ||||||
| Ambient operating temperature |
-20°C to 65°C *2 | ||||||
| Storage temperature range |
-25°C to 70°C | ||||||
| Degree of protection |
IEC IP67 | ||||||
| Insertion durability |
200 times | ||||||
| Cable strength | 98 N for 15 s | — | 98 N for 15 s | — | |||
| Vibration resistance |
No current interruptions of more than 1 μs while performing simple vibrations at either 10 to 500 Hz with 1.52-mm full amplitude or at acceleration 100 m/s2, whichever is smaller |
||||||
