| Main | 
| Part Number | LC1E400M7N | 
| Product Series | Compact | 
| product type | Contactor | 
| product short name | LC1E | 
| Application field of contactor | Applied to non-inductive or micro-inductive loads, and | 
| resistance furnaces to AC loads with a power factor greater than or equal to 0.95 | 
| use category | AC-3AC | 
| -1 | 
| number of poles | 3P | 
| Rated working voltage [Ue] | Power circuit: <= 690 V AC 50/60 Hz | 
| Rated operating current [Ie] | 400 A 55 °C) at <= 440 V AC AC-3 for power circuits | 
| 500 A 40 °C) at <= 440 V AC AC-1 for power circuits | 
| [Uc] control circuit voltage | 230V AC 50/60Hz | 
| Additional information | 
| Motor power (kW) | 110 kW at 220/230 V AC 50/60 Hz (AC-3) | 
| 200 kW at 380/400 V AC 50/60 Hz (AC-3) | 
| 220 kW at 415/440 V AC 50/ 60 Hz (AC-3) | 
| 250 kW at 415/440 V AC 50/60 Hz (AC-3) | 
| 257 kW at 500 V AC 50/60 Hz (AC-3) | 
| 280 kW at 660/ 690 V AC 50/60 Hz (AC-3) | 
| Loop contact type | 3 NO | 
| Conventional thermal current [Ith] | 500 A at <40 °C for power circuits | 
| Rated making capacity [Irms] | 4000 A at 440 V AC for power circuits conforming to IEC 60947-4-1 | 
| Rated breaking capacity | 3200 A at 440 V for power circuits conforming to IEC 60947 | 
| Rated short-time withstand current [Icw] | 3600 A at <40 °C – 10 s for power circuits | 
| Fuses for use with relays | 10 A gG at <= 690 V for type 1 suitable control circuits conforming to IEC 60947-5-1 | 
| 630 A gG at <= 690 V for type 1 suitable power circuits | 
| average impedance | 0.26 mΩ – Ith 500 A 50 Hz for power circuits | 
| power consumption per pole | 42W AC-3 | 
| 65W AC-1 | 
| Rated insulation voltage [Ui] | 690 V conforming to IEC 60947-4-1 | 
| Overvoltage category | III | 
| pollution level | 3 | 
| Rated impulse withstand voltage [Uimp] | 8 kV coil not connected to power circuit conforming to IEC 60947 | 
| Mechanical life | 4000000 times | 
| Electrical life | 250000 times AC-1 | 
| 600000 times AC-3 | 
| Control loop characteristics | AC at 50/60 Hz standard | 
| Control voltage limit | 0.85…1.1 Uc 55 °C Run 50/60 Hz | 
| 0.35…0.5 Uc 55 °C Release 50/60 Hz | 
| (~50Hz pickup) power consumption (VA) | 1075 VA 50 Hz 0.9 20 °C) | 
| 1075 VA 60 Hz 0.9 20 °C) | 
| (~50Hz hold) power consumption (VA) | 15 VA 50 Hz 0.9 20 °C) | 
| 15 VA 60 Hz 0.9 20 °C) | 
| heat dissipation | 14 W for control circuits | 
| action time | 100…170 ms on opening | 
| 40…75 ms off | 
| operating frequency | 2400 cycles/h at <55 °C | 
| Wiring capacity | Control circuit: Bolt fastening1 1…4 mm² Cable selection: Flexible cord without wire terminals | 
| Control circuit: Bolt fastening2 1…4 mm² Cable selection: Flexible cord without wire terminal | 
| Control circuit: Bolt fastening 1 1…4 mm² cable option: flexible cable with cable terminals | 
| control circuit: screw fastened2 1…2.5 mm² cable option: flexible cable with cable terminal | 
| control circuit: screw cable option1 1…4 mm² cable option : Solid without wire terminals | 
| Control circuit: Bolt fastening2 1…4 mm² Cable selection: Solid without wire terminals | 
| Power circuit: Cable with lug2 Lug outer diameter Ø: 150 mm | 
| Power circuit: Terminal 2 Busbar cross-section: 30 x 5 mm | 
| Tightening torque | Control circuit: 1.2 Nm | 
| Power circuit: 35 Nm | 
| Auxiliary contact type | Does not contain | 
| Minimum switching voltage | 17 V for control circuits | 
| Minimum switching current [Imin] | 5 mA for control loop | 
| Insulation resistance | > 10 MΩ for control loops | 
| non-overlapping time | 1.5 ms power-on to ensure NC and NO contact | 
| 1.5 ms power-off to ensure NC and NO contact | 
| installation method | Chassis mount | 
| environment | 
| standard | IEC 60947-4-1 | 
| GB 14048.4 | 
| certified product | CCC | 
| IP protection class | IP00 conforming to IEC 60529 | 
| Protective measures | TH (pollution degree 3) conforming to IEC 60068 | 
| ambient air temperature | -20…70 °C (allowed at Uc) | 
| 5…55 °C operation | 
| -60…80 °C storage | 
| working altitude | 3000 m None | 
| Fire resistance and abnormal high temperature resistance | 850 °C conforming to IEC 60695-2-1 | 
| Shock and vibration resistance | Shock resistance with contacts closed (15 gn (11ms)) | 
| shock resistance with contacts open (1.5 gn (5…300 Hz)) | 
| shock resistance with contacts open (6 gn (11ms)) | 
| shock resistance with contacts closed (5 gn (5…300 Hz)) | 
| high | 375 mm | 
| width | 213 mm | 
| depth | 219 mm | 
| Product Weight | 9.1kg | 
| packaging unit | 
| Unit Type of Package 1 | PCE | 
| Number of Units in Package 1 | 1 | 
| Package 1 Height | 26.0cm | 
| Package 1 Width | 25.0cm | 
| Package 1 Length | 30.0cm | 
| Package 1 Weight | 9450.0 g | 
| Unit Type of Package 2 | P06 | 
| Number of Units in Package 2 | 10 | 
| Package 2 Height | 67.0cm | 
| Package 2 Width | 60.0cm | 
| Package 2 Length | 80.0cm | 
| Package 2 Weight | 104.5 kg | 
| contract warranty | 
| Warranty | 18 months |