Panasonic ER-X Series Ionizers were conceived with wide surface areas in mind. To achieve optimal charge removal of surfaces, various concepts were considered. Besides operation using variable air pressure (from airless to 5 bar air pressure), discharge frequency and ion balance can be set manually. Naturally these Ionizers can also be operated in automatic mode.

Other advantages include four different head sizes, from 160mm to 640mm in length, and the ability to connect up to two heads to one controller. Hence areas up to 1.2m wide can be handled. The heads feature an angle adjustment of 360° permitting the best possible charge neutralization.

Pulse Ac Method Area Ionizer ER-X Series Features :

  • Manual Mode (Discharge Frequency And Ion Balance)
  • Easy Maintenance
  • Up To Two Heads Can Be Connected To One Controller

For the Part Number not in our attribute selection, please contact us directly: sales@inosaki.my

The Pulse Ac Method Area Ionizer ER-X Series Part Number :
ER-X016HC, ER-X016, ER-X064HC, ER-X032HC, ER-X008, ER-X048HC
ER-XC02, ER-X064, ER-X008HC, ER-X032, ER-X048, ER-X001

Data Sheet   |   Selection Guide

Super-compact slim head

By thoroughly redesigning the discharge needle, we have created a super-compact slim head that combines high-speed charge removal*1 with a maintenance-saving design*2. The ER-X series can be embedded in, or retrofitted onto, equipment that did not provide enough space for antistatic measures in the past.

*1: Pulse AC method with built-in air tubes (max. pressure 0.5 MPa)

*2:  Discharge needle air barrier structure, discharge needle unit for simple need replacement

 

 

ORDER GUIDE

Heads [Head connection cable is not supplied with the head. Please order it separately.]

Type Charge removal time  (±1,000 V→±100 V) Ion balance Effective charge removal width Model No.
 

 

 

Bar type

 

 

 

 

 

 

 

Spot type 0.3 sec. or less 

(Note 1),

0.5 sec. or less 

(Note 2)

±30 V or less

(Note 2, 3)

 

50 mm 1.969 in approx. ER-X001

(Note 4)

High and low temperature resistant 1 sec. or less 

(Note 2)

 

80 mm 3.150 in approx. ER-X008

(Note 4)

ER-X008HC

(Note 5)

High and low temperature resistant 160 mm 6.299 in approx. ER-X016
ER-X016HC

(Note 5)

High and low temperature resistant 320 mm 12.598 in approx. ER-X032
ER-X032HC

(Note 5)

High and low temperature resistant 480 mm 18.898 in approx. ER-X048
ER-X048HC

(Note 5)

High and low temperature resistant 640mm 25.197 in approx. ER-X064
ER-X064HC

(Note 5)

[/fusion_table]

 

Notes: 1) Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge frequency 50 Hz and air supply 60 ℓ/min. (0.3 MPa). 2)  Typical value in condition of discharge distance 100 mm 3.937 in (ER-X001: 50 mm 1.969 in), center of the product, discharge frequency 50 Hz (ER-X□HC: 30 Hz) and no air supply.

  • Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 °C, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.
  • The ER-X001 and ER-X008 must be combined with the new-type ER-XC02

For the Identification of previous-type and new-type controllers and for the combination with the head, refer to p.16.

  • The ER-X□HC high / low temperature resistant type head can be used under temperatures from -60 to +200 °C -76 to +392 °F. Be sure to use this head in combination with the new-type controller, ER-XC02.

For the Identification of previous-type and new-type controllers and for the combination with the head, refer to p.16.

 

Controller [Please order power cable or AC adapter separately.]

Type Model No. Number of heads connected Output
Standard type ER-XC02 Max. 2 units PhotoMOS relay

[/fusion_table]

 

Head connection cables [Head connection cable is not supplied with the head. Please order it separately.]

Model No. Description
ER-XCCJ2H Length: 2 m 6.562 ft, Net weight: 120 g approx. Cabtyre cable with both connector
ER-XCCJ5H Length: 5 m 16.404 ft, Net weight: 290 g approx.
ER-XCCJ10H (Note) Length: 10 m 32.808 ft, Net weight: 560 g approx.

[/fusion_table]

Note: Cannot be used with the high and low temperature resistant type head ER-X□HC.