Manufacturer Part Number: MOXA ICF-1150I-S-SC
OEM Spec Ref 

The MOXA ICF-1150I-S-SC is a high-performance Serial-to-Fiber Converter engineered to facilitate robust and secure serial communication across fiber optic media. This model is tailored to extend serial transmission distances significantly, up to 40 km, using single-mode fiber. It’s ideal for demanding industrial applications requiring reliable data transmission over optical fiber, ensuring high data integrity and noise immunity.

Key Features:

  • Extended Transmission Range: Capable of transmitting serial data up to 40 km on single-mode fiber, this converter extends the reach of serial communication networks significantly.
  • Advanced Surge Protection: Includes built-in optical isolation for the serial signals and 2 kV isolation protection for the power supply, safeguarding against voltage spikes and grounding issues.
  • Versatile Serial Compatibility: Supports both RS-232 and RS-422/485 serial interfaces, making it adaptable to various types of serial equipment and applications.
  • Redundant Power Inputs: Equipped with dual power inputs to ensure continuous operation and minimize downtime due to power failures.
  • Easy Installation and Configuration: Features a compact design and simple dip-switch configuration, facilitating hassle-free installation and setup.

Benefits:

  • Enhanced Data Integrity: Provides robust protection against electromagnetic interference and voltage surges, enhancing the reliability and accuracy of data transmission.
  • Operational Continuity: The redundant power supplies contribute to higher system reliability and operational uptime, crucial for industrial environments.
  • Scalable Solutions: With its dual interface support, the converter can seamlessly integrate into existing systems, providing flexibility and scalability in network design.
  • Reduced Maintenance Costs: Durable design and built-in protections reduce the need for frequent maintenance and replacements, lowering operational costs.

Applications:

  • Industrial Automation: Ideal for connecting serial devices in large industrial plants where long-distance communication is necessary.
  • Transportation Systems: Can be used in transportation management systems where data integrity and transmission over long distances are critical.
  • Utility Networks: Suitable for utility facilities that require reliable serial-to-fiber conversion to ensure continuous system operations.
  • Remote Monitoring Systems: Ensures reliable data transmission in remote monitoring and control systems, where extended distance coverage is essential.

The MOXA ICF-1150I-S-SC Serial-to-Fiber Converter is an exemplary solution for extending serial communications in challenging industrial environments, ensuring both reliability and high performance.

Specification

Serial Interface No. of Ports 2
Serial Standards RS-232
RS-422
RS-485
Baudrate 50 bps to 921.6 kbps (supports non-standard baudrates)
Flow Control ADDC (automatic data direction control) for RS-485
Connector 5-pin terminal block
Single-mode SC connector
Isolation 2 kV (I models)
Optical Fiber Refer Table 2
Pull High/Low Resistor for RS-485 150 kilo-ohm, 10 kilo-ohm, 4.7 kilo-ohm, 3.3 kilo-ohm, 1 kilo-ohm, 909 ohm, 822 ohm, 770 ohm, 500 ohm, 485 ohm
RS-485 Data Direction Control ADDC (automatic data direction control)
Terminator for RS-485 N/A, 120 ohms, 120 kilo-ohms
Serial Signals RS-232 TxD, RxD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Power Parameters No. of Power Inputs 1
Input Current 300 mA @ 12 to 48 VDC
Input Voltage 12 to 48 VDC
Overload Current Protection Supported
Power Connector Terminal block
Power Consumption 300 mA @ 12 to 48 VDC
Physical Characteristics IP Rating IP30
Housing Metal
Dimensions 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
Weight 330 g (0.73 lb)
Installation DIN-rail mounting
Environmental Limits Operating Temperature 0 to 60°C (32 to 140°F)
Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Standards and Certifications EMC EN 55032/35
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
Environmental Testing IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-3
Safety UL 61010-2-201
Vibration IEC 60068-2-6
Hazardous Locations UL/cUL Class I Division 2 Groups A/B/C/D
ATEX Zone 2
MTBF Time 792,085 hrs
Standards Telcordia (Bellcore), GB
Warranty Warranty Period 5 years
Details See www.moxa.com/warranty

[/fusion_table]

 

Optical Fiber

Multi-Mode Single-Mode
Fiber Cable Requirements 50/125 µm, 800 MHz G.652
62.5/125 µm, 500 MHz
Typical Distance 5 km 40km
Wavelength Typical (nm) 850 1310
TX Range (nm) 840 to 860 1290 to 1330
RX Range (nm) 800 to 900 1100 to 1650
Optical Power TX Range (dBm) 0 to -5 0 to -5
RX Range (dBm) 0 to -20 0 to -25
Link Budget (dB) 15 20
Dispersion Penalty (dB) 1 1

[/fusion_table]

Weight 0.33 kg
Dimensions 3.03 × 7 × 11.5 cm