Sensing method |
Through-beam |
Retro-reflective
(with M.S.R. function) *1 |
Diffuse reflective |
Model |
Horizontal E3S-CT11(-M1J) |
Horizontal E3S-CR 11(-M1J) |
Horizontal E3S-CD11(-M1J) |
Horizontal E3S-CD12(-M1J) |
Vertical E3S-CT61(-M1J) |
Vertical E3S-CR 61(-M1J) |
Vertical E3S-CD61(-M1J) |
Vertical E3S-CD62(-M1J) |
Sensing distance |
30 m |
3 m (when using E39-R1) |
700 mm
(300 × 300 mm white paper) |
2 m
(300 × 300 mm white paper) |
Standard sensing object |
Opaque, 15-mm dia. min. |
Opaque, 75-mm dia. min. |
— |
Differential travel |
— |
20% max. of sensing distance |
Directional angle |
Emitter and Receiver:
3° to15° |
3° to 10° |
— |
Light source
(wavelength) |
Infrared LED (880 nm) |
Red LED (700 nm) |
Infrared LED (880 nm) |
Power supply
voltage |
10 to 30 VDC including 10% (p.p) ripple |
Current
consumption |
50 mA max.
(Emitter 25 mA max.
Receiver 25 mA max.) |
40 mA max. |
Control output |
Load power supply voltage: 30 VDC max.
Load current: 100 mA max. (Residual voltage: NPN output: 1.2 V max., PNP output: 2.0 V max.)
Open controller output (NPN/PNP selectable)
Light-ON/Dark-ON selectable |
Protection
circuits |
Power supply
reverse polarity
circuit protection,
Output short-
circuit protection |
Power supply reverse polarity protection, Output short-circuit protection, Mutual interference prevention |
Response time |
Operate or reset: 1 ms max. |
Operate or reset 2 ms max. |
Sensitivity
adjustment |
One-turn adjuster |
Two-turn endless adjuster with an indicator |
Ambient
illumination
(Receiver side) |
Incandescent lamp: 5,000 lx max.
Sunlight: 10,000 lx max. |
Ambient temperature
range |
Operating: -25°C to 55°C, Storage: -40°C to 70°C (with no icing or condensation) |
Ambient humidity
range |
Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) |
Insulation
resistance |
20 MΩ min. (at 500 VDC) |
Dielectric strength |
1,000 VAC, 50/60 Hz for 1 min |
Vibration resistance |
Destruction: 10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s2 for 0.5 hours each in X, Y, and Z directions |
Shock resistance |
Destruction: 1,000 m/s2 3 times each in X, Y, and Z directions |
Degree of protection |
IEC60529: IP67 (in-house standards: oil-resistant), NEMA: 6P (indoors only) *2 |
Connection method |
Pre-wired (standard cable length: 2 m) or Pre-wired M12 Connector (standard cable length: 0.3 m) |
Weight
(packed state) |
Approx. 270 g
(Pre-wired cable)
Approx. 230 g
(Pre-wired Connector (M12)) |
Approx. 160 g
(Pre-wired cable)
Approx. 130 g
(Pre-wired Connector (M12)) |
Approx. 150 g
(Pre-wired cable)
Approx. 110 g
(Pre-wired Connector (M12)) |
Material |
Case |
Zinc die-cast |
Operation
panel cover |
PES (polyether sulfone) |
Lens |
Methacrylic resin |
Mounting
Bracket |
Stainless steel (SUS304) |
Accessories |
Mounting Bracket (with screws), Adjustment screwdriver, Instruction manual, and Reflector (only for Retro-reflective Sensors) |