Part Number: 1059410
Non-contact safety switches: RE11-SAC
OEM Spec Ref
| System part | Sensor with actuator |
| Sensor principle | Magnetic |
| Number of N/O contacts | 1 |
| Number of N/C contacts | 1 |
| Number of signaling contacts | 0 |
| Safe switch on distance Sao | 3 mm |
| Safe switch off distance Sar | 12 mm |
| Active sensor surfaces | 1 |
| Actuation directions | 5 |
| B10d parameter | 2 x 107 switching cycles (with small load) |
| Type | Type 4 (EN ISO 14119) |
| Actuator coding level | Low coding level (EN ISO 14119) |
| Safe state in the event of a fault | The switch has no internal fault detection and is unable to assume a safe state in the event of a fault. Fault detection is performed by the connected safety-related logic unit. |
| Safe series connection | None, only individual wiring (with diagnostics) |
| Connection type | Plug connector, M8, 4-pin |
| Type of output | Reed contacts |
| Switching voltage | ≤ 30 V DC |
| Switching current | ≤ 400 mA |
Mechanical data
| Design | Rectangular |
| Dimensions (W x H x D) | 26 mm x 36 mm x 13 mm |
| Weight | + 0.1 kg |
| Housing material | VISTAL® |
Ambient data
| Enclosure rating | IP67 (IEC 60529) |
| Ambient operating temperature | –30 °C … +60 °C |
| Storage temperature | –30 °C … +60 °C |
| Vibration resistance | 10 Hz … 55 Hz, 1 mm (EN 60947-5-3) |
| Shock resistance | 30 g, 11 ms (EN 60947-5-3) |
| Weight | 0.059 kg |
|---|---|
| Dimensions | 8 × 2 × 11 cm |
