USD 225.60
7.5 kW (LO) 400V 3AC VFD, IP20, 0-550 Hz V/f control, 0-240 Hz vector control, USS/Modbus/BACnet, 4 kHz pulse, IE2 efficiency, 6 digital inputs.
7.5 kW (LO) 400V 3AC VFD, IP20, 0-550 Hz V/f control, 0-240 Hz vector control, USS/Modbus/BACnet, 4 kHz pulse, IE2 efficiency, 6 digital inputs.
| Parameter | Value |
|---|---|
| Input Number of phases | 3 AC |
| Input Line voltage | 380 ... 440 V +10%-20% |
| Input Line frequency | 47 ... 63 Hz |
| Input Rated current (LO) | 15.80 A |
| Output Number of phases | 3 AC |
| Output Rated voltage | 400 V |
| Output Rated power IEC 400V (LO) | 7.50 kW |
| Output Rated current 400V (IN) | 16.50 A |
| Output Rated current 380V (IN) | 16.50 A |
| Output Rated current (LO) | 16.50 A |
| Output Max. output current | 18.20 A |
| Output Pulse frequency | 4 kHz |
| Output frequency for vector control | 0 ... 240 Hz |
| Output frequency for V/f control | 0 ... 550 Hz |
| Low Overload (LO) | 110% base load current IL for 60 s in a 600 s cycle time |
| Standard digital inputs Number | 6 |
| Standard digital inputs Switching level: 0 → 1 | 11 V |
| Standard digital inputs Switching level: 1 → 0 | 5 V |
| Standard digital inputs Max. inrush current | 15 mA |
| Fail-safe digital inputs Number | 0 |
| Digital outputs Number as relay changeover contact | 4 |
| Digital outputs Output (resistive load) | DC 30 V, 1.0 A |
| Digital outputs Number as transistor | 0 |
| Analog / digital inputs Number | 2 (Differential input) |
| Analog / digital inputs Resolution | 12 bit |
| Switching threshold as digital input 0 → 1 | 4 V |
| Switching threshold as digital input 1 → 0 | 1.6 V |
| Analog outputs Number | 2 (Non-isolated output) |
| PTC/KTY interface | 1 motor temperature sensor input, sensors that can be connected: PTC, KTY, PT1000 and Thermo-Click, accuracy ±5 °C |
| Power factor λ | 0.75 ... 0.93 |
| Power factor cos φ 1 | 0.99 |
| Efficiency η | 0.97 |
| Sound pressure level (1m) | 63 dB |
| Power loss | 0.232 kW |
| Filter class (integrated) | Unfiltered |
| EMC category (with accessories) | without |
| Safety function "Safe Torque Off" | without SIRIUS device (e.g. via S7-1500F) |
| Communication | USS, Modbus RTU, BACnet MS/TP |
| Standard board coating type | Class 3C2, according to IEC 60721-3-3: 2002 |
| Cooling | Air cooling using an integrated fan |
| Cooling air requirement | 0.009 m³/s (0.325 ft³/s) |
| Installation altitude | 1,000 m (3,280.84 ft) |
| Operation temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Transport temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Max. operation relative humidity | 95% At 40 °C (104 °F), condensation and icing not permissible |
| Signal cable conductor cross-section | 0.15 ... 1.50 mm² (AWG 24 ... AWG 16) |
| Line side Version | screw-type terminal |
| Line side Conductor cross-section | 1.50 ... 6.00 mm² (AWG 16 ... AWG 10) |
| Motor end Version | Screw-type terminals |
| Motor end Conductor cross-section | 1.50 ... 6.00 mm² (AWG 16 ... AWG 10) |
| PE connection | On housing with M4 screw |
| Max. motor cable length Shielded | 150 m (492.13 ft) |
| Max. motor cable length Unshielded | 300 m (984.25 ft) |
| V/f linear / square-law / parameterizable | Yes |
| V/f with flux current control (FCC) | Yes |
| V/f ECO linear / square-law | Yes |
| Sensorless vector control | Yes |
| Vector control, with sensor | No |
| Encoderless torque control | Yes |
| Torque control, with encoder | No |
| Degree of protection | IP20 / UL open type |
| Frame size | FSB |
| Net weight | 5.6 kg (12.35 lb) |
| Compliance with standards | CE, EAC, RCM, RoHS II |
| CE marking | EMC Directive 2004/108/EC, Low-Voltage Directive 2006/95/EC |
| Efficiency class | IE2 |
| Physical Weight (kg) | 5.6 |
| Dimensions L x W x H (cm) | 20.9 x 10 x 27.5 |
The SINAMICS G120XA precisely regulates the speed of conveyor systems in manufacturing and logistics. Its 7.5 kW power output and V/f control modes allow for fine-tuned material flow, preventing bottlenecks and optimizing production rates.
Inconsistent material throughput and energy waste from inefficient fixed-speed conveyor operations are eliminated.
This VFD optimizes energy consumption in industrial pump and fan applications by dynamically adjusting motor speed based on demand, using its V/f control and 7.5 kW rating. The integrated PTC/KTY interface provides motor thermal protection.
High energy costs and wear-and-tear associated with constant speed pumps and fans are mitigated by demand-based speed control.
The 7.5 kW SINAMICS G120XA precisely controls the speed of agitators in mixing tanks within chemical and food processing plants. Its sensorless vector control allows for accurate torque delivery, crucial for maintaining homogeneity and process consistency.
Inconsistent product quality and inefficient mixing processes caused by fixed-speed or imprecise agitator control are overcome.
