The DP/DP transceiver is housed in a 40 mm casing of the S7-300 series. It can be mounted on a standard mounting rail (7.5 mm and 15 mm) as well as on a mounting rail for the S7 design.

The preferred arrangement is upright in a row, side by side, and without clearance.

The transceiver is connected to the PROFIBUS DP networks through an integral 9-pin sub-D connector.

Siemens Coupler Product Specifications:

[fusion_table fusion_table_type=”1″ fusion_table_rows=”” fusion_table_columns=”” margin_top=”1ps” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” animation_type=”” animation_direction=”left” animation_color=”” hue=”” saturation=”” lightness=”” alpha=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=””]

DP/DP transceiver
Article Number 6ES7158-0AD01-0XA0
PROFIBUS transmission rate max. 12 Mbit/s
Interfaces
PROFIBUS DP 9-pin Sub-D connector
Supply voltage 24 V DC
Current consumption typ. 150 mA
Mounting Upright (DIP switches above)
Perm. environmental conditions
Operating temperature
horizontal mounting 0°C … +60°C
all other mounting positions 0°C … +40°C
Transport/storage temperature -40 °C … +70 °C
Relative humidity 10-95 % at +25 °C
Design
Dimensions (W x H x D) in mm 40 x 127 x 117
Weight approx. 250 g
Degree of protection IP20

[/fusion_table]

Weight 0.301 kg
Dimensions 12.8 × 15.2 × 5.2 cm