Article number |
6ES7155-5BA00-0AB0 |
|
ET 200MP, IM155-5 DP ST |
General information |
|
Product type designation |
IM 155-5 DP ST |
HW functional status |
From FS01 |
Firmware version |
V2.0.0 |
Vendor identification (VendorID) |
81AAh |
Product function |
|
● I&M data |
Yes; I&M0 to I&M3 |
● Module swapping during operation (hot swapping) |
No |
● Isochronous mode |
No |
Engineering with |
|
● STEP 7 TIA Portal configurable/integrated from version |
V13 / V13 |
● STEP 7 configurable/integrated from version |
V5.5 SP3 / – |
● PROFIBUS from GSD version/GSD revision |
V1.0 / V5.1 |
Configuration control |
|
via user data |
No |
via dataset |
No |
Supply voltage |
|
Rated value (DC) |
24 V |
permissible range, lower limit (DC) |
19.2 V |
permissible range, upper limit (DC) |
28.8 V |
Reverse polarity protection |
Yes |
Short-circuit protection |
Yes |
Mains buffering |
|
● Mains/voltage failure stored energy time |
5 ms |
Input current |
|
Current consumption (rated value) |
0.2 A; at 24 V DC and without load |
Current consumption, max. |
1.2 A; at 20.4 V DC and max. load |
Inrush current, max. |
4 A |
I²t |
0.09 A²·s |
from interface 5 V DC, max. |
80 mA |
Power |
|
Infeed power to the backplane bus |
14 W |
Power loss |
|
Power loss, typ. |
4 W |
Address area |
|
Address space per module |
|
● Address space per module, max. |
32 byte; per input / output |
Address space per station |
|
● Address space per station, max. |
244 byte; per input / output |
Hardware configuration |
|
Integrated power supply |
Yes |
System power supply can be plugged in to left of IM |
No |
Number of permissible power segments |
1 |
Rack |
|
● Modules per rack, max. |
12; I/O modules |
Interfaces |
|
Number of PROFIBUS interfaces |
1 |
1. Interface |
|
Interface types |
|
● RS 485 |
Yes |
Protocols |
|
● PROFIBUS DP slave |
Yes |
Interface types |
|
RS 485 |
|
● Transmission rate, max. |
12 Mbit/s |
Protocols |
|
Open IE communication |
|
● TCP/IP |
No |
PROFIBUS DP |
|
Services |
|
— SYNC capability |
Yes |
— FREEZE capability |
Yes |
— DPV1 |
Yes |
Interrupts/diagnostics/status information |
|
Status indicator |
Yes |
Alarms |
Yes |
Diagnostics function |
Yes |
Diagnostics indication LED |
|
● RUN LED |
Yes; green LED |
● ERROR LED |
Yes; red LED |
● MAINT LED |
Yes; Yellow LED |
● Connection display DP |
Yes; green LED |
Potential separation |
|
between backplane bus and electronics |
No |
between PROFIBUS DP and all other circuit components |
Yes |
between supply and all other circuits |
No |
Isolation |
|
Isolation tested with |
707 V DC (type test) |
Ambient conditions |
|
Ambient temperature during operation |
|
● horizontal installation, min. |
-25 °C; from FS04 |
● horizontal installation, max. |
60 °C |
● vertical installation, min. |
-25 °C; from FS04 |
● vertical installation, max. |
40 °C |
Altitude during operation relating to sea level |
|
● Installation altitude above sea level, max. |
5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
connection method / header |
|
ET-Connection |
|
● via BU/BA Send |
No |
Dimensions |
|
Width |
35 mm |
Height |
147 mm |
Depth |
129 mm |
Weights |
|
Weight, approx. |
360 g |