Article number |
6ES7138-4FR00-0AA0 |
|
ET 200S, 1 F-RO DC24V/5A AC24..230V/5A |
Supply voltage |
|
Load voltage L+ |
|
● Rated value (DC) |
24 V; Supply via fail-safe output, e.g. of an F-DO |
Input current |
|
from load voltage L+ (without load), max. |
100 mA; from control voltage |
from backplane bus 3.3 V DC, max. |
10 mA |
Power loss |
|
Power loss, typ. |
2.1 W |
Address area |
|
Address space per module |
|
● Address space per module, max. |
1 byte |
● with packing |
2 bit |
Digital outputs |
|
Type of digital output |
Relays |
Number of digital outputs |
1 |
Short-circuit protection |
No |
Controlling a digital input |
Yes |
Output current |
|
● for signal “1” rated value |
5 A |
● for signal “1” minimum load current |
5 mA |
Switching frequency |
|
● with resistive load, max. |
2 Hz |
● with inductive load, max. |
0.1 Hz |
Total current of the outputs |
|
● Current per module, max. |
8 A |
Total current of the outputs (per group) |
|
horizontal installation |
|
— up to 40 °C, max. |
8 A |
— up to 50 °C, max. |
6 A |
— up to 60 °C, max. |
5 A; up to max. 24.8 V |
vertical installation |
|
— up to 40 °C, max. |
6 A |
Relay outputs |
|
Switching capacity of contacts |
|
— Thermal continuous current, max. |
5 A |
Cable length |
|
● shielded, max. |
200 m |
● unshielded, max. |
200 m |
Interrupts/diagnostics/status information |
|
Diagnostics indication LED |
|
● Status indicator digital output (green) |
Yes |
Potential separation |
|
Potential separation digital outputs |
|
● between the channels |
Yes |
● between the channels and backplane bus |
Yes |
● Between the channels and load voltage L+ |
Yes; between channels and control voltage |
Standards, approvals, certificates |
|
Highest safety class achievable in safety mode |
|
● acc. to EN 954 |
4 |
● Performance level according to ISO 13849-1 |
e |
● SIL acc. to IEC 61508 |
Up to SIL 3 |
Dimensions |
|
Width |
30 mm |
Height |
81 mm |
Depth |
52 mm |
Weights |
|
Weight, approx. |
90 g |