$ 234.60
In standard applications with moderate mechanical and EMC loads, SIMATIC BusAdapters with an RJ45 interface can be used, e.g. the BusAdapter BA 2xRJ45.
For machines and systems in which higher mechanical and/or EMC loads act on the devices, a SIMATIC BusAdapter with connection via FastConnect (FC) or fiber-optic cable (SCRJ or LC) is recommended. Likewise, all SIMATIC BusAdapters with a fiber-optic cable connection (SCRJ, LC) can be used with the increased loads.
BusAdapters with connections for fiber-optic cables can be used to cover high potential differences between two stations and/or high EMC loads.
| Article number | 6ES7193-6AG40-0AA0 |
| SIMATIC Bus adapter BA LC/FC | |
| General information | |
| Product type designation | BA LC/FC |
| HW functional status | from FS04 |
| Interfaces | |
| Number of PROFINET interfaces | 1 |
| Supports protocol for PROFINET IO | |
| ● Number of RJ45 ports | |
| ● Number of FC (FastConnect) connections | 1 |
| ● Number of SCRJ ports | 0 |
| ● Number of LC ports | 1; Wavelength of 1 270 … 1 380 nm, corresponds to 100BASE-FX |
| Cable length | |
| — PCF | |
| — Plastic FOC (POF) | |
| — PCF-GI | |
| — Cu conductors | 100 m |
| — Multimode graded-index fiber 50/125 µm | 3 km |
| — Multimode graded-index fiber 62.5/125 μm | 3 km |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● horizontal installation, min. | -30 °C |
| ● horizontal installation, max. | 60 °C |
| ● vertical installation, min. | -30 °C |
| ● vertical installation, max. | 50 °C |
| Altitude during operation relating to sea level | |
| ● Installation altitude above sea level, max. | 5 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system manual |
| Dimensions | |
| Width | 20 mm |
| Height | 69.5 mm |
| Depth | 59 mm |
| Weights | |
| Weight, approx. | 50 g |
| Weight | 0.068 kg |
|---|---|
| Dimensions | 6.8 × 8.7 × 3 cm |
Axmatic Sdn Bhd
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penang
