Part Number |
6EP1336-2BA10 |
Input |
|
type of the power supply network |
1-phase AC |
supply voltage at AC |
Automatic range selection |
● initial value |
|
supply voltage |
120 V |
● 1 at AC rated value |
|
● 2 at AC rated value |
230 V |
input voltage |
85 … 132 V |
● 1 at AC |
|
● 2 at AC |
176 … 264 V |
design of input wide range input |
No |
overvoltage overload capability |
2.3 × Vin rated, 1.3 ms |
operating condition of the mains buffering |
at Vin = 120/230 V |
buffering time for rated value of the output current in the event of power failure minimum |
20 ms |
operating condition of the mains buffering |
at Vin = 120/230 V |
line frequency |
50 Hz |
● 1 rated value |
|
● 2 rated value |
60 Hz |
line frequency |
47 … 63 Hz |
input current |
7.5 A |
● at rated input voltage 120 V |
|
● at rated input voltage 230 V |
3.5 A |
current limitation of inrush current at 25 °C maximum |
11:00 AM |
I2t value maximum |
10 A²·s |
fuse protection type |
T 10 A (not accessible) |
● in the feeder |
Recommended miniature circuit breaker: from 10 A characteristic C or circuit-breaker 3RV2411-1JA10 (120 V) or 3RV2411-1FA10 (230 V) |
Output |
|
voltage curve at output |
Controlled, isolated DC voltage |
output voltage at DC rated value |
24 V |
output voltage |
24 V |
● at output 1 at DC rated value |
|
relative overall tolerance of the voltage |
3% |
relative control precision of the output voltage |
0.50% |
● on slow fluctuation of input voltage |
|
● on slow fluctuation of ohm loading |
1% |
residual ripple |
150 mV |
● maximum |
|
voltage peak |
240 mV |
● maximum |
|
adjustable output voltage |
24 … 28 V |
product function output voltage adjustable |
Yes |
type of output voltage setting |
via potentiometer; max. 480 W |
display version for normal operation |
Green LED for 24 V OK |
type of signal at output |
Relay contact (NO contact, rating 50 V DC/ 0.3 A) for “24 V OK” |
behavior of the output voltage when switching on |
No overshoot of Vout (soft start) |
response delay maximum |
1.5 s |
voltage increase time of the output voltage |
|
● typical |
50 ms |
● maximum |
500 ms |
output current |
|
● rated value |
20 A |
● rated rangesupplied active power typical short-term overload current |
0 … 20 A; 24 A up to +45°C; +60 … +70 °C: Derating 5%/K |
supplied active power typical |
480 W |
short-term overload current |
|
● on short-circuiting during the start-up typical |
35 A |
● at short-circuit during operation typical |
35 A |
duration of overloading capability for excess current |
|
● on short-circuiting during the start-up typical |
100 ms |
● at short-circuit during operation |
100 ms |
product feature |
|
● bridging of equipment |
Yes |
number of parallel-switched equipment resources for increasing the power |
2 |
Efficiency |
|
efficiency in percent |
90% |
power loss [W] |
53 W |
● at rated output voltage for rated value of the output current typical |
|
Closed-loop control |
|
relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical |
1% |
relative control precision of the output voltage load step of resistive load 50/100/50 % typical |
3% |
setting time |
10 ms |
● maximum |
|
Protection and monitoring |
|
design of the overvoltage protection |
Yes, according to EN 60950-1 |
response value current limitation typical |
21 A |
property of the output short-circuit proof |
Yes |
design of short-circuit protection |
Electronic shutdown, automatic restart |
enduring short circuit current RMS value |
7:00 AM |
● maximum |
|
overcurrent overload capability in normal operation |
overload capability 150 % Iout rated up to 5 s/min |
display version for overload and short circuit |
– |
Safety |
|
galvanic isolation between input and output |
Yes |
galvanic isolation |
Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 |
operating resource protection class |
Class I |
leakage current |
3.5 mA |
● maximum |
|
● typical |
1 mA |
protection class IP |
IP20 |
Approvals |
|
certificate of suitability |
Yes |
● CE marking |
|
● UL approval |
Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1) |
● CSA approval |
Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259, cCSAus (CSA C22.2 No. 60950-1, UL 60950-1) |
● cCSAus, Class 1, Division 2 |
No |
● ATEX |
No |
certificate of suitability |
No |
● IECEx |
|
● NEC Class 2 |
No |
● ULhazloc approval |
No |
● FM registration |
No |
type of certification CB-certificate |
Yes |
certificate of suitability |
|
● EAC approval |
Yes |
certificate of suitability shipbuilding approval |
Yes |
shipbuilding approval |
DNV GL |
Marine classification association |
|
● American Bureau of Shipping Europe Ltd. (ABS) |
No |
● French marine classification society (BV) |
No |
● DNV GL |
Yes |
● Lloyds Register of Shipping (LRS) |
No |
● Nippon Kaiji Kyokai (NK) |
No |
EMC |
|
standard |
EN 55022 Class B |
● for emitted interference |
|
● for mains harmonics limitation |
EN 61000-3-2 |
● for interference immunity |
EN 61000-6-2 |
environmental conditions |
|
ambient temperature |
0 … 70 °C; with natural convection |
● during operation |
|
● during transport |
-40 … +85 °C |
● during storage |
-40 … +85 °C |
environmental category according to IEC 60721 |
Climate class 3K3, 5 … 95% no condensation |
Mechanics |
|
type of electrical connection |
screw-type terminals |
● at input |
L1, N, PE: 1 screw terminal each for 0.2 … 4 mm² single-core/finely stranded |
● at output |
+, -: 2 screw terminals each for 0.2 … 4 mm² |
● for auxiliary contacts |
13, 14 (alarm signal): 1 screw terminal each for 0.14 … 1.5 mm² |
width of the enclosure |
115 mm |
height of the enclosure |
145 mm |
depth of the enclosure |
150 mm |
required spacing |
50 mm |
● top |
|
● bottom |
50 mm |
● left |
0 mm |
● right |
0 mm |
net weight |
2.4 kg |
product feature of the enclosure housing can be lined up |
Yes |
fastening method |
Snaps onto DIN rail EN 60715 35×7.5/15 |
electrical accessories |
Buffer module |
mechanical accessories |
Device identification label 20 mm × 7 mm, pale turquoise 3RT19001SB20 |
MTBF at 40 °C |
1 778 916 h |
other information |
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |