$ 379.27
Inosaki – Your Trusted Phoenix Contact Distributor
Inosaki proudly stands as one of the largest distributors of Phoenix Contact products, offering a comprehensive range of terminal blocks, interface modules, power supplies, and relays.
Series Models: PT Series, ST Series, TB Series, UT Series, and UK Series, PTV Series, UKH Series, Micro Series.
Discover industry-leading Phoenix Contact power supplies, such as:
Get Your Phoenix Contact Catalog Today
Need detailed product information? Contact us at sales@inosaki.com to request your Phoenix Contact catalog.
DC operation | |
Input voltage | 24 V DC |
Input voltage range | 100 V DC … 350 V DC |
Voltage type of supply voltage | DC |
Inrush current | < 34 A (< 1.1 A2s) |
Inrush current integral (I2t) | < 1.1 A2s |
Mains buffering time | see diagram |
Buffer period | 20 min. (2 A) |
Rotary selector switch | Can be set to: 0.5 min; 1 min; 2 min; 3 min; 5 min; 10 min; 15 min; 20 min; 30 min; permanent |
Current consumption | 0.6 A |
0.85 A (230 V AC) | |
1.1 A | |
1.5 A (120 V AC) | |
Protective circuit | Varistor |
Power factor (cos phi) | approx. 0.5 |
Typical response time | 100 ms |
Input fuse | 3.15 A (slow-blow, internal) |
Permissible backup fuse | B6 B10 B16 |
Recommended breaker for input protection | 6 A … 16 A (Characteristics B, C, D, K) |
AC operation | |
Nominal input voltage range | 100 V AC … 240 V AC |
Input voltage range | 85 V AC … 264 V AC |
Voltage type of supply voltage | AC |
Efficiency | > 83 % |
Nominal output voltage | 24 V DC (AC input voltage available: 22.5 to 29.5 V DC, AC input voltage not available: 27.9 to 19.2 V DC) |
Setting range of the output voltage (USet) | 22.5 V DC … 29.5 V DC (normal mode; in the buffer mode, dependent on a battery voltage of 27.9 V DC … 19.2 V DC) |
Nominal output current (IN) | 2 A |
Output current limit | max. 3 A |
Bridging time | 1200 s |
Derating | 60 °C … 70 °C (2.5%/K) |
Feedback voltage resistance | 35 V DC |
Protection against overvoltage at the output (OVP) | < 35 V DC |
Max. capacitive load | unlimited |
Control deviation | < 1 % (change in load, static 10 % … 90 %) |
Residual ripple | < 50 mVPP |
Output power | 48 W |
Peak switching voltages nominal load | < 100 mVPP |
Maximum no-load power dissipation | 3.8 W |
Power loss nominal load max. | 15 W |
Power dissipation | 3.8 W |
10.1 W | |
2.1 W | |
Rise time | < 100 ms |
Connection in parallel | yes |
Connection in series | No |
Mains operation | |
Nominal output voltage | 24 V DC |
Output voltage range | 22.5 V DC … 29.5 V DC |
Nominal output current (IN) | 2 A |
Battery operation | |
Nominal output voltage | 24 V DC |
Output voltage range | 19.2 V DC … 27.6 V DC (UOUT = UBAT – 0,5 V DC) |
Nominal output current (IN) | 2 A |
Signal: Active (high = buffer module is loaded) | |
Output description | Power Good |
Maximum switching voltage | ≤ 24 V |
Output voltage | + 24 V |
Continuous load current | ≤ 20 mA |
Signal: Alarm | |
Output description | Relay output |
Maximum switching voltage | ≤ 24 V |
Output voltage | 24 V |
Continuous load current | ≤ 200 mA |
Signal: Battery charge | |
Output description | Relay output |
Maximum switching voltage | ≤ 24 V |
Output voltage | 24 V |
Continuous load current | ≤ 200 mA |
Signal: Battery mode | |
Output description | Relay output |
Maximum switching voltage | ≤ 24 V |
Output voltage | 24 V |
Continuous load current | ≤ 200 mA |
Input | |
Connection method | Pluggable COMBICON screw connections |
Conductor cross section, rigid min. | 0.2 mm² |
Conductor cross section, rigid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 |
Stripping length | 8 mm |
Screw thread | M3 |
Tightening torque, min | 0.5 Nm |
Tightening torque max | 0.6 Nm |
Output | |
Connection method | Pluggable COMBICON screw connections |
Conductor cross section, rigid min. | 0.2 mm² |
Conductor cross section, rigid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 |
Stripping length | 8 mm |
Screw thread | M3 |
Tightening torque, min | 0.5 Nm |
Tightening torque max | 0.6 Nm |
Signal | |
Conductor cross section, rigid min. | 0.2 mm² |
Conductor cross section, rigid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 |
Screw thread | M3 |
Tightening torque, min | 0.5 Nm |
Tightening torque max | 0.6 Nm |
Width | 67.5 mm |
Height | 99 mm |
Depth | 107 mm |
Item number | 2866640 |
Packing unit | 1 pc |
Minimum order quantity | 1 pc |
Sales Key | CM20 |
Product Key | CMUM13 |
Catalog Page | Page 350 (C-4-2019) |
GTIN | 4046356113533 |
Weight per Piece (including packing) | 496 g |
Weight per Piece (excluding packing) | 447 g |
Customs tariff number | 85371091 |
Country of origin | CN |
Degree of protection | IP20 |
Ambient temperature (operation) | -25 °C … 70 °C (> 60 °C Derating: 2,5 %/K) |
Ambient temperature (storage/transport) | -40 °C … 85 °C |
Climatic class | 3K3 (in acc. with EN 60721) |
Max. permissible relative humidity (operation) | 95 % (at 25 °C, non-condensing) |
Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
15 Hz … 150 Hz, 2.3g, 90 min. |
Weight | 0.447 kg |
---|---|
Dimensions | 10.7 × 6.75 × 9.9 cm |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penang
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)