Phoenix Contact develops terminal blocks, power supplies, relays, connectors, signal conditioners, controllers & PLCs, I/O systems, Industrial Ethernet, controller system cabling, PCB terminal blocks & connectors, and surge suppression.
| Item number | 2963941 |
| Packing unit | 1 pc |
| Minimum order quantity | 1 pc |
| Product key | DNA113 |
| Catalog page | Page 21 (IF-2009) |
| GTIN | 4017918904784 |
| Weight per piece (including packing) | 192.3 g |
| Weight per piece (excluding packing) | 159.02 g |
| Customs tariff number | 85371098 |
| Country of origin | DE |
| Note on application | |
| Note on application | Only for industrial use |
| Product type | Safety relays |
| Product family | PSRclassic |
| Application | Emergency stop |
| Safety door | |
| Control | 2-channel |
| Mechanical service life | approx. 107 cycles |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Insulation characteristics: Air clearances and creepage distances between the power circuits | |
| Overvoltage category | III |
| Degree of pollution | 2 |
| Maximum power dissipation for nominal condition | 16.44 W (US = 26.4 V, IL² = 72 A², PTotal max = 2.04 W + 14.4 W) |
| Nominal operating mode | 100% operating factor |
| Air clearances and creepage distances between the power circuits | |
| Rated insulation voltage | 250 V |
| Rated surge voltage/insulation | See section “Insulation coordination” |
| General | |
| Rated control circuit supply voltage US | 24 V DC -15 % / +10 % |
| Power consumption at US | typ. 1.68 W (DC) |
| Rated control supply current IS | typ. 70 mA |
| Input voltage range in reference to UN | 0.85 … 1.1 |
| Typical input current at UN | 70 mA DC (at US) |
| Inrush current | < 3.5 A (Δt = 3 ms at Us) |
| < 100 mA (Δt = 500 ms, with Us/Ix at S12) | |
| > -100 mA (Δt = 300 ms, with Us/Ix at S22) | |
| < 6 mA (with Us/Ix to S34) | |
| Current consumption | typ. 38 mA (S12) |
| typ. -38 mA (S22) | |
| typ. 1 mA (with Us/Ix to S34) | |
| Voltage at input/start and feedback circuit | approx. 24 V DC |
| Filter time | 5 ms (at A1 in the event of voltage dips at Us) |
| No test pulses permitted | |
| Typical response time | 150 ms (automatic start) |
| Typ. starting time with Us | 250 ms (with Us when controlled via A1) |
| Typical release time | 20 ms (on demand via the sensor circuit) |
| 45 ms (on demand via A1) | |
| Concurrence | ∞ |
| Recovery time | 1 s (following demand of the safety function) |
| < 1 s (Boot time) | |
| Protective circuit | Surge protection; Suppressor diode |
| Max. permissible overall conductor resistance | approx. 50 Ω (Input and start circuits at US) |
| Operating voltage display | Green LED |
| Status display | LED (green) |
| Contact switching type | 3 enabling current paths |
| 1 signaling current path | |
| Contact material | AgSnO2, + 0.2 µm Au |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 10 V AC/DC |
| Limiting continuous current | 6 A (N/O contact) |
| Maximum inrush current | 6 A |
| Inrush current, minimum | 10 mA |
| Sq. Total current | 72 A2 (Enabling current paths) |
| 36 A2 (Signaling current path 31/32) | |
| Switching capacity min. | 100 mW |
| Switching capacity in accordance with IEC 60947-5-1 | DC13, enabling current paths |
| AC15, enabling current paths | |
| 2 A (DC13, signaling current paths) | |
| 1.5 A (AC15, signaling current paths) | |
| Output fuse | 10 A gL/gG (Enabling current paths) |
| 4 A gL/gG (Low-demand enabling current paths) | |
| 6 A gL/gG (Signaling current path) |
| Connection technology | |
| pluggable | yes |
| Conductor connection | |
| Connection method | Push-in connection |
| Conductor cross section rigid | 0.2 mm² … 1.5 mm² |
| Conductor cross section flexible | 0.2 mm² … 1.5 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² … 1.5 mm² (only together with CRIMPFOX 6) |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² … 1.5 mm² (only together with CRIMPFOX 6) |
| Conductor cross-section AWG | 24 … 16 |
| Stripping length | 8 mm |
| Width | 22.5 mm |
| Height | 112 mm |
| Depth | 114.5 mm |
| Color (Housing) | yellow (RAL 1018) |
| Housing material | PA |
| Safety data | |
| Stop category | 0 |
| Safety data: EN ISO 13849 | |
| Category | 4 |
| Performance level (PL) | e (5 A DC13; 5 A AC15; 8760 switching cycles/year) |
| Safety data: IEC 61508 – High demand | |
| Safety Integrity Level (SIL) | 3 |
| Safety data: IEC 61508 – Low demand | |
| Safety Integrity Level (SIL) | 3 |
| Safety data: EN IEC 62061 | |
| Safety Integrity Level (SIL) | 3 |
| Ambient conditions | |
| Degree of protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient temperature (operation) | -20 °C … 55 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C … 70 °C |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15g |
| Vibration (operation) | 10 Hz … 150 Hz, 2g |
| Air clearances and creepage distances between the power circuits | |
| Standards/regulations | DIN EN 60947-1 |
| Mounting type | DIN rail mounting |
| Assembly note | See derating curve |
| Mounting position | vertical or horizontal |
| Weight | 0.1923 kg |
|---|---|
| Dimensions | 11.45 × 2.25 × 11.2 cm |
