$ 115.00
Phoenix Contact develops terminal blocks, power supplies, relays, connectors, signal conditioners, controllers & PLCs, I/O systems, Industrial Ethernet, controller system cabling, PCB terminal blocks & connectors, and surge suppression.
Item number | 2903677 |
Packing unit | 10 pc |
Minimum order quantity | 10 pc |
Product key | DK6949 |
Catalog page | Page 300 (C-5-2019) |
GTIN | 4046356758901 |
Weight per piece (including packing) | 36.1 g |
Weight per piece (excluding packing) | 34.4 g |
Customs tariff number | 85364190 |
Country of origin | PL |
Product Properties
Product type | Single relay |
Operating mode | 100% operating factor |
Mechanical service life | approx. 2x 107 cycles |
Insulation characteristics | |
Insulation | Basic insulation |
Overvoltage category | II |
Pollution degree | 2 |
Data management status | |
Date of last data management | 17.01.2025 |
Service life electrical | see diagram |
Maximum power dissipation for nominal condition | 1.01 W |
Test voltage (Winding/contact) | 2.5 kVrms (50 Hz, 1 min., winding/contact) |
Test voltage (Changeover contact/changeover contact) | 2 kVrms (50 Hz, 1 min., changeover contact/changeover contact) |
Rated insulation voltage | 250 V AC |
Rated surge voltage | 2.5 kV |
Coil side | |
Nominal input voltage UN | 24 V DC |
Input voltage range | 18.7 V DC … 46.8 V DC (20 °C) |
Drive and function | monostable |
Drive (polarity) | polarized |
Typical input current at UN | 42 mA |
Typical response time | 13 ms |
Typical release time | 14 ms |
Protective circuit | Freewheeling diode |
Status display | LED (yellow) |
Switching | |
Contact switching type | 4 changeover contacts |
Type of switch contact | Single contact |
Contact material | AgNi |
Maximum switching voltage | 250 V AC/DC |
Minimum switching voltage | 5 V (At 24 mA) |
Limiting continuous current | 6 A |
Maximum inrush current | 16 A (20 ms, N/O contacts) |
Min. switching current | 5 mA (at 24 V) |
Interrupting rating (ohmic load) max. | 144 W (at 24 V DC) |
124 W (at 48 V DC) | |
108 W (at 60 V DC) | |
52 W (at 110 V DC) | |
48 W (at 220 V DC) | |
1500 VA (for 250 V AC) | |
Switching capacity min. | 0.12 W |
Switching capacity | 2 A (at 24 V, DC13) |
0.22 A (at 120 V, DC13) | |
0.11 A (at 250 V, DC13) | |
1.5 A (at 24 V, AC15) | |
1.5 A (at 120 V, AC15) | |
1 A (at 240 V, AC15) | |
Motor load according to UL 508 | 1/3 HP, 240 V AC |
Connection method | Plug-in connection |
Width | 21.2 mm |
Height | 27.5 mm |
Depth | 35.6 mm |
Ambient conditions | |
Degree of protection | RT I |
Ambient temperature (operation) | -40 °C … 70 °C |
Ambient temperature (storage/transport) | -40 °C … 85 °C |
Standards/regulations | IEC 60664 |
IEC 61810 |
Corrosive gas test | |
Identification | ISA-S71.04. G3 Harsh Group |
EN 60068-2-60 |
Mounting position | any |
Weight | N/A |
---|---|
MOQ(pcs) |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penang
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)