With the BaseUnits (BUs), the ET 200SP offers a rugged and service-friendly design with permanent wiring:

  • No tools needed for one-handed wiring using push-in terminals
  • Actuation of the spring NC contacts with a standard screwdriver, with a blade width up to 3.5 mm
  • Outstanding access due to arrangement of measuring tap, spring NC contacts and cable entry in columns, while at the same time reducing the space required by 64%
  • Fault-proof color coding of the spring NC contacts for better orientation in the terminal panel
  • Replacement of I/O modules during operation without affecting the wiring
  • Operation with module gaps (gaps without I/O module)
  • Automatic coding of the I/O modules prevents destruction of the electronics if a module is accidentally inserted in the wrong slot during replacement
  • High EMC interference immunity:
    • self-assembling shielded backplane bus
    • multi-layer conductor plate with shield levels for interference-free signal transmission from the terminal to the I/O module
    • system-integrated, space-saving shield connection for quick installation
  • Self-assembling potential groups without external wiring or jumpers
  • Replaceable terminal box
  • Side-by-side latching of the BUs for high mechanical and EMC loads
  • Optional module-specific color identification of the terminals according to the color code CC
  • Optional equipment marking using slide-in equipment labeling plates

An ET 200SP station can be expanded via one ‘BU-Send’ BaseUnit with a “BA-Send” BusAdapter plugged onto it with up to 16 modules from the ET 200AL series of I/O devices with IP67 protection.

Siemens BaseUnit ET 200SP Product Specifications:

[fusion_table fusion_table_type=”1″ fusion_table_rows=”” fusion_table_columns=”” margin_top=”1ps” margin_right=”” margin_bottom=”” margin_left=”” hide_on_mobile=”small-visibility,medium-visibility,large-visibility” class=”” id=”” animation_type=”” animation_direction=”left” animation_color=”” hue=”” saturation=”” lightness=”” alpha=”” animation_speed=”0.3″ animation_delay=”0″ animation_offset=””]

Article number 6ES7193-6BP20-0BB0 6ES7193-6BP20-0BB1 6ES7193-6BP20-0DC0 6ES7193-6BP20-0BC1 6ES7193-6BP00-0BD0 6ES7193-6BP20-0BF0
BaseUnit Type B0, BU20-P12+A4+0B BaseUnit Type B1, BU20-P12+A0+4B, PU 1 BaseUnit Type C0, BU20-P6+A2+4D BaseUnit Type C1, BU20-P6+A2+4B BaseUnit Type D0, BU20-P12+A0+0B BaseUnit Type F0, BU20-P8+A4+0B
General information
Product type designation BU type B0 BU type B1 BU type C0 BU type C1 BU type D0 BU type F0
HW functional status FS10 and higher FS10 and higher FS10 and higher FS10 and higher FS10 and higher FS10 and higher
Supply voltage
Rated value (DC) See manual See manual See manual See manual See manual See manual
● For P1 and P2 bus 24 V 24 V 24 V 24 V 120 V
● For AUX bus 24 V; Equal potential group to P1/P2 bus or PE 24 V; Equal potential group to P1/P2 bus or PE 24 V; Equal potential group to P1/P2 bus or PE 24 V; Equal potential group to P1/P2 bus or PE 120 V; Equal potential group to P1/P2 bus or PE
● for process terminals 24 V 24 V 24 V 24 V
Rated value (AC) See manual See manual See manual See manual See manual See manual
● For P1 and P2 bus 230 V 230 V 230 V 230 V 277 V
● For AUX bus 230 V; Equal potential group to P1/P2 bus or PE 230 V; Equal potential group to P1/P2 bus or PE 230 V; Equal potential group to P1/P2 bus or PE 230 V; Equal potential group to P1/P2 bus or PE 277 V; Equal potential group to P1/P2 bus or PE
● for process terminals 230 V 230 V 230 V 230 V 277 V; 480 V (L1 – L2 – L3); 277 V (L, N)
external protection for power supply lines Yes Yes; 10 A miniature circuit breaker with type B or C tripping characteristic for the respective rated supply voltage
Mains filter
● integrated No No No No Yes; Between N and FE No
Current carrying capacity
up to 60 °C, max. 10 A 10 A 10 A 10 A 5 A 10 A
For P1 and P2 bus, max. 10 A 10 A 10 A 10 A 10 A 10 A
For AUX bus, max. 10 A 10 A 10 A 10 A 10 A 10 A
For process terminals, max. 5 A 5 A 5 A; 10 A for process terminals 5 and 6 5 A; 10 A for process terminals 5 and 6 5 A 5 A
Hardware configuration
Automatic encoding Yes Yes Yes Yes Yes Yes
Formation of potential groups
● New potential group No
● Potential group continued from the left Yes
Slots
● Number of slots 1 1 1 1; Type C1 1; Type D0 1; Type F0
Potential separation
between backplane bus and supply voltage Yes Yes Yes Yes Yes Yes
between process terminals and supply voltage Yes Yes; Not applicable for process terminals 9 to 12 Yes Yes Yes
between power bus and supply voltage No Yes No No Yes Yes
Isolation
Isolation tested with 3 100 V DC 3 100 V DC 3 100 V DC 3 100 V DC 3 100 V DC 3 100 V DC
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C -30 °C -30 °C -30 °C -30 °C -30 °C
● horizontal installation, max. 60 °C 60 °C 60 °C 60 °C 60 °C 60 °C
● vertical installation, min. -30 °C -30 °C -30 °C -30 °C -30 °C -30 °C
● vertical installation, max. 50 °C 50 °C 50 °C 50 °C 50 °C 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 2 000 m; On request: Installation altitudes greater than 2 000 m 2 000 m; On request: Installation altitudes greater than 2 000 m 2 000 m; On request: Installation altitudes greater than 2 000 m 2 000 m; On request: Installation altitudes greater than 2 000 m 2 000 m; On request: Installation altitudes greater than 2 000 m 2 000 m; On request: Installation altitudes greater than 2 000 m
Accessories
Color coding labels
● for process terminals CC51, CC52 CC51 does not exist
● for AUX terminals CC81 to CC83 CC84 to CC86 CC84 to CC86 does not exist
● for add-on terminals does not exist does not exist does not exist
connection method / header
Terminals
● Terminal type Push-in terminal Push-in terminal Push-in terminal Push-in terminal Push-in terminal
● Conductor cross-section, min. 0.14 mm²; AWG 26 0.14 mm²; AWG 26 0.14 mm²; AWG 26 0.14 mm²; AWG 26 0.14 mm²; AWG 26
● Conductor cross-section, max. 2.5 mm²; AWG 14 2.5 mm²; AWG 14 2.5 mm²; AWG 14 2.5 mm²; AWG 14 2.5 mm²; AWG 14
● Number of process terminals to I/O module 12; Pro slot 12; Pro slot 12; Pro slot 16; Pro slot 12; Pro slot
● Number of terminals to AUX bus 0 0 0 0 0
● Number of add-on terminals 0 0 0 0 0
● Number of terminals with connection to P1 and P2 bus 0; Pro slot 0; Pro slot 0; Pro slot 2; Pro slot 0; Pro slot
Dimensions
Width 20 mm 20 mm 20 mm 20 mm 20 mm 20 mm
Height 117 mm 117 mm 117 mm 117 mm 117 mm 117 mm
Depth 35 mm 35 mm 35 mm 35 mm 35 mm 35 mm
Weights
Weight, approx. 48 g 48 g 47 g 47 g 47 g 48 g

[/fusion_table]

Weight N/A
Dimensions N/A